Interested In Advertising? | Contact Us Here
Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

Pages: [1]

PurefectWindowCleaning

  • Posts: 2303
Getting my noggin around a 2 man system
« on: February 12, 2014, 04:37:34 pm »
Could i have the one pump and controller, then fit a shut off tap to each hose (before or after the DI) then if we only want the one pole on, we can just turn the second one off?

Im DI only. Any other ideas lads? Best way to do it basiclly
Logged

ascjim

Re: Getting my noggin around a 2 man system
« Reply #1 on: February 12, 2014, 05:06:10 pm »
split into two after di
Logged

Don Kee

  • Posts: 4907
Re: Getting my noggin around a 2 man system
« Reply #2 on: February 12, 2014, 05:09:41 pm »
Y piece after d.i, splitting into two hose reels.  have a shut of tap on one of the splits to stop that reel being fed when not in use
Logged

Soupy

  • Posts: 21263
Re: Getting my noggin around a 2 man system
« Reply #3 on: February 12, 2014, 05:11:06 pm »
You are overthinking it.

Tank - pump - DI - Split - Hoses - stop end.

When you are only running one pole just don't plug t'other one into the hose  ;)
Logged
#FreeTheBrightonOne
#aliens

DaveG

  • Posts: 6348
Re: Getting my noggin around a 2 man system
« Reply #4 on: February 12, 2014, 05:15:26 pm »
Quote from: Soupy on February 12, 2014, 05:11:06 pm
You are overthinking it.

Tank - pump - DI - Split - Hoses - stop end.

When you are only running one pole just don't plug t'other one into the hose  ;)

+1
But leave 2nd reel connected when not in use. ...
Logged
You can't polish a turd

Ian Sheppard

  • Posts: 1242
Re: Getting my noggin around a 2 man system
« Reply #5 on: February 12, 2014, 05:30:34 pm »
Running two pole and hose lines is possible, However be aware water will want to follow the easiest course. So if you have two poles at different heights most of the pressure will go to the lowest pole. You nay find that the pole waorking at a higher level or with more hose does not have sufficient flow.

The pressure difference between the two poles will also make calibrating a control more difficult as the control is trying to reconcile two different pressure levels. To work efficiently two pumps and controls would be better.
Logged
V16 Is Here
https://www.youtube.com/watch?v=1AhbZirSlpI&t=8s
Polarity Protect technology

wpclean

Re: Getting my noggin around a 2 man system
« Reply #6 on: February 12, 2014, 06:50:30 pm »
Easier if you just filter the water straight into the tank.   Always better to have two pumps in case one breaks.
Logged

PurefectWindowCleaning

  • Posts: 2303
Re: Getting my noggin around a 2 man system
« Reply #7 on: February 12, 2014, 07:57:50 pm »
Thanks for the reply's guys.

So is Ian correct then? Will I need 2 pumps, controllers and DI?

Logged

Soupy

  • Posts: 21263
Re: Getting my noggin around a 2 man system
« Reply #8 on: February 12, 2014, 08:00:06 pm »
No. One pump is ok. I have never had an issue with different pressure. You might notice it a bit on a 3 storey but not really a problem.
Logged
#FreeTheBrightonOne
#aliens

Ian Sheppard

  • Posts: 1242
Re: Getting my noggin around a 2 man system
« Reply #9 on: February 12, 2014, 08:19:39 pm »
Running two poles of one pump puts additional strain on the pump as it tries to work against different pressure of two lines and poles. Working at low levels might work. Two pumps will be more efficient and flexible.
Logged
V16 Is Here
https://www.youtube.com/watch?v=1AhbZirSlpI&t=8s
Polarity Protect technology

koopmaster

  • Posts: 498
Re: Getting my noggin around a 2 man system
« Reply #10 on: February 12, 2014, 09:34:40 pm »
I was thinking of getting this pump  as it can just replace my single pump

http://www.windowcleaningstuff.co.uk/pumps-accessories/601-shurflo-pump-8000-5l-min-female-ports.html
Logged
Pages: [1]