[colin bird]

I have a purefreedom van mounter ro system,digi controller has gone tits up,I have an old controller from a two pump system ,that does not have an on off switch for filling,am I correct in thinking that if I connect the solenoid direct to the battery I will open and allow me to fill tank.
Any help appreciated

[Smudger]

If I were you I'd remove the solenoid completely until you replace the controller
Should be fitted between the prefilters, undo the hose either side ( or unwind it off the filter housing and replace with a straight bit of hose

Darran

[colin bird]

If I were you I'd remove the solenoid completely until you replace the controller
Should be fitted between the prefilters, undo the hose either side ( or unwind it off the filter housing and replace with a straight bit of hose

Darran

thanks for that will look in the morning

[colin bird]

Guys some of you must have this problem'

All help is appreciated

[Smudger]

So you don't want to bypass it then?

I have a controller from when I removed the system, but it's in use not a spare otherwise you could have that

Darran

[colin bird]

So you don't want to bypass it then?

I have a controller from when I removed the system, but it's in use not a spare otherwise you could have that

Darran

thanks have sorted it,and filed tsnk