Interested In Advertising? | Contact Us Here
Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

my new set up for collecting water
« on: November 05, 2013, 05:26:21 pm »
Ive cleaned all the gutter out , down pipe now goes into a top tank for collecting any dirt, then as you can see in the photo it goes through a filter this is a 5 micron pre filter, then it goes into the tank.

ive ordered a new filter,

Activated carbon block
The carbon is formed in specially pressured, high density blocks to gain high adsorption rate of chlorine, other chemicals and multiparticle organic substances.

i will see if this will bring down TDS




 

Clever Forum Name

  • Posts: 5942
Re: my new set up for collecting water
« Reply #1 on: November 05, 2013, 05:41:46 pm »
Smart. Please come back with results  :D

SPE

Re: my new set up for collecting water
« Reply #2 on: November 05, 2013, 05:49:07 pm »
interesting, let us know how you get on.
Is the large tank just for the harvesting of rain water ?
meaning are you planning on just transferring it to the van or does it go through a further process like ro or di at point of use ?
I've not measured the tds of rain water but sure I have read on here before that its pretty low (between 5 and 10 ppm ?) , also its unlikely to have any chlorine / chemical in it.
Simon

Re: my new set up for collecting water
« Reply #3 on: November 05, 2013, 06:10:32 pm »
interesting, let us know how you get on.
Is the large tank just for the harvesting of rain water ?
meaning are you planning on just transferring it to the van or does it go through a further process like ro or di at point of use ?
I've not measured the tds of rain water but sure I have read on here before that its pretty low (between 5 and 10 ppm ?) , also its unlikely to have any chlorine / chemical in it.
Simon


It will go from the big tank to the van tank then through the DI resin bottle.
the TDS was 015 then went up to 026 so I cleaned the gutter ( never been done in 10 years).

with all the rain we are going to have I think it's worth a try.

Re: my new set up for collecting water
« Reply #4 on: November 05, 2013, 06:12:10 pm »
 the water flow through the filter is good, not sure how it will go with a carbon filter,

SPE

Re: my new set up for collecting water
« Reply #5 on: November 05, 2013, 06:29:14 pm »

with all the rain we are going to have I think it's worth a try.
[/quote]

definitely,
unfortunately I live in a flat still, but when I do move to a house I will be doing the same even if only to supplement my metered use.

You could go bear grylls styley and try using an old sock as a filter  ;D ;)

dazmond

  • Posts: 24460
Re: my new set up for collecting water
« Reply #6 on: November 05, 2013, 06:30:09 pm »
it should be overflowing with water with all the rain were having lately! >:( ;D
price higher/work harder!

Clever Forum Name

  • Posts: 5942
Re: my new set up for collecting water
« Reply #7 on: November 05, 2013, 06:52:32 pm »
PPM 002 after 10 mins of raining here. New roof and clean gutters.

Ian Lancaster

  • Posts: 2811
Re: my new set up for collecting water
« Reply #8 on: November 05, 2013, 07:29:18 pm »
You shouldn't need a carbon filter - that's primarily for removing artificially introduced chlorine and there won't be any of that!  Rain water collected in a perfectly clean container without touching any other surface should be pure, it hasn't had the opportunity to dissolve any solids so its total dissolved solid rating should be 000 Any increase in TDS will be solids dissolved after the rain lands on the roof.  All you will need to do is remove any solid particles it may have acquired from the roof, guttering etc which a 5 micron filter should do and then pass it through a DI if you're concerned about a few ppm's but if it was less than about 10-12 I wouldn't bother.