Interested In Advertising? | Contact Us Here
Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here


Rob_Mac

Re: If Carlsberg built pressure washing vans?
« Reply #41 on: July 21, 2013, 09:51:35 pm »
That is similar to mine.

Difference is mine is a 24HP engine and 35LPM. I was going to go for a 45 LPM pump but left it a little tight on the heater

Rob ;D

BDCS

  • Posts: 4777
Re: If Carlsberg built pressure washing vans?
« Reply #42 on: July 21, 2013, 10:22:41 pm »
The jetter in my van sits on a pair of rails - take the exhaust off, two bolts and the whole shooting match lifts out. This is done every year to service and clean it - if it breaks down a loan machine would slide in to keep me working

chris scott

  • Posts: 3414
Re: If Carlsberg built pressure washing vans?
« Reply #43 on: July 21, 2013, 10:35:50 pm »
Or this.....
http://www.tech-clean.co.uk/index.php/products/industrial-hot-pressure-washer-skid-mounted-hot-pressure-washers/
250 bar at 21lpm *** from***£8000+vat Expensive!
14 Briggs ,ws252,gearbox,hotbox, whirl a way £2900 incl
I rarely use heat but the hot box ...gives me the option. Two machines will put 250 bar at 42lpm on the floor plus you always have a spare machine if the sh** hits the fan you can get the job finished albeit slower. 4 Hoses split into 10m sections so always have a spare. Weight is around 100kgs per machine .1000 litre ibc 50% full and two machines with hoses etc ,driver etc should be near limit.Taking into account the van will be 2000kgs.
www.cleaning-service.uk.com
www.render-cleaning.co
https://www.cleaning-service.uk.com/bromoco-systems/
Exterior cleaning specialists covering Merseyside,Lancashire and Cheshire. TEL 08000 933267

Roger Oakley

Re: If Carlsberg built pressure washing vans?
« Reply #44 on: July 21, 2013, 11:26:17 pm »
Or this.....
http://www.tech-clean.co.uk/index.php/products/industrial-hot-pressure-washer-skid-mounted-hot-pressure-washers/

Cheaper version to the H&M, nothing wrong with that, except when you start putting this kind of kit on a trailer weight will become an issue, which has been spoken about before on here. Van mount is a better way to go, just check that you are legal, Chris will no doubt tell you the do's & don'ts though, and NO it is not another dig at you Chris, just that you like to help people that can't be bothered to do the research for themselves  ;D

BDCS

  • Posts: 4777
Re: If Carlsberg built pressure washing vans?
« Reply #45 on: July 22, 2013, 12:36:39 pm »
Roger you were a haulage industry big hitter before you retired into deck chair refurbs

G O Cleaning

Re: If Carlsberg built pressure washing vans?
« Reply #46 on: July 22, 2013, 01:14:34 pm »

Roger Oakley

Re: If Carlsberg built pressure washing vans?
« Reply #47 on: July 22, 2013, 05:34:03 pm »
Roger you were a haulage industry big hitter before you retired into deck chair refurbs

At one time, Carl, but used to put events together and have class 1 so would haul the things around europe when needed.

BDCS

  • Posts: 4777
Re: If Carlsberg built pressure washing vans?
« Reply #48 on: July 22, 2013, 10:00:37 pm »
That was my point  ;)

Matt Gibson

  • Posts: 2482
Re: If Carlsberg built pressure washing vans?
« Reply #49 on: July 23, 2013, 02:08:24 pm »
The van set up ive got now is my perfect set up.. simples.. ;D

Re: If Carlsberg built pressure washing vans?
« Reply #50 on: July 23, 2013, 07:11:44 pm »
Go on then......what's the spec  >: ;D

Blast Away

Re: If Carlsberg built pressure washing vans?
« Reply #51 on: July 23, 2013, 08:13:11 pm »
Seen as though people are whipping their c**ks out.

Falch T3H. 21lpm @300 bar. Twin burner. F***in' hot!






chris scott

  • Posts: 3414
Re: If Carlsberg built pressure washing vans?
« Reply #52 on: July 23, 2013, 08:19:54 pm »
No competition  ;D 
www.cleaning-service.uk.com
www.render-cleaning.co
https://www.cleaning-service.uk.com/bromoco-systems/
Exterior cleaning specialists covering Merseyside,Lancashire and Cheshire. TEL 08000 933267

Blast Away

Re: If Carlsberg built pressure washing vans?
« Reply #53 on: July 23, 2013, 08:23:23 pm »
Just debating whether to buff the hood or just get it carbon vinyl wrapped.

Mike Halliday

  • Posts: 11581
Re: If Carlsberg built pressure washing vans?
« Reply #54 on: July 23, 2013, 09:34:44 pm »
What spec is that pump? I think I have 2 of them in my shed, do you know the cost of them so I know the worth of mine
Mike Halliday.  www.henryhalliday.co.uk

Blast Away

Re: If Carlsberg built pressure washing vans?
« Reply #55 on: July 23, 2013, 11:54:56 pm »
What spec is that pump? I think I have 2 of them in my shed, do you know the cost of them so I know the worth of mine

I don't know the price mate. But here's a link http://www.malcleanse.co.uk/speck-300-bar-21-lpm-pressure-washer-pump-np2521300-p-4108.html

G O Cleaning

Re: If Carlsberg built pressure washing vans?
« Reply #56 on: July 24, 2013, 06:09:16 am »
Lee noticed on your facebook you said 30lpm 500 bar, was that a dif m/c  ?
 On your vid the skater wasnt removing gum did you still hav to spot ?

Matt Gibson

  • Posts: 2482
Re: If Carlsberg built pressure washing vans?
« Reply #57 on: July 24, 2013, 06:21:42 am »
Go on then......what's the spec  >: ;D


24hp Lombardini. Burner. Built in genny. Smallish tank. Shelving. Extra room for steamer/whatever. Trailer @ 30lpm run from a briggs and stratton petrol for any second jobs/bigger jobs.

Going to put a hotbox on the trailer for gum removal, and then maybe change it to lpg then ill have everything i want.

trevor perry

  • Posts: 2454
Re: If Carlsberg built pressure washing vans?
« Reply #58 on: July 24, 2013, 08:25:17 am »
Seen as though people are whipping their c**ks out.

Falch T3H. 21lpm @300 bar. Twin burner. F***in' hot!







 How do you walk about with that between your legs Lee  ;D ;D
better to remain silent and be thought a fool than to speak out and remove any doubt

Blast Away

Re: If Carlsberg built pressure washing vans?
« Reply #59 on: July 24, 2013, 08:28:48 am »
Lee noticed on your facebook you said 30lpm 500 bar, was that a dif m/c  ?
 On your vid the skater wasnt removing gum did you still hav to spot ?

Different machine mate yes. Not ours. We're doing all Manchester city centre public paving 5 nights a week for a national company and they've supplied us with 1 of 8 of their machines.

This one here https://www.youtube.com/watch?v=N19D3GlkVoc

It's not supposed to take the gum off too mate. Still need to spot gum. The way we work is scate at 500 bar on heat 100c max(really fast!!!), then split to 2 lances 15 each and rinse and spot gum. Currently cleaning King St in town.