This is an advertisement
Interested In Advertising? | Contact Us Here

Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

Carl@Cwc

  • Posts: 1076
air locks on flat tanks
« on: April 19, 2013, 10:09:06 pm »
looking for some ideas really?

constantly getting airlocks with our layflat tanks , is there an easy fix /solution to clearing these?
i saw on a grippa tank install someone had managed to install something to clear them quickly and without mess?

any help appreciated.

i plan on refitting an upright in new vans as the airlocks are a daily nightmare unless an easy fix is out there?

Re: air locks on flat tanks
« Reply #1 on: April 19, 2013, 10:21:23 pm »
On3 way valve.

R.C Property

  • Posts: 1599
Re: air locks on flat tanks
« Reply #2 on: April 19, 2013, 10:50:42 pm »
As sunshine said, I got one fitted on each of my pumps from my flat tank,
Even when empty and fill up I don't get any.

Carl@Cwc

  • Posts: 1076
Re: air locks on flat tanks
« Reply #3 on: April 19, 2013, 11:16:58 pm »
As sunshine said, I got one fitted on each of my pumps from my flat tank,
Even when empty and fill up I don't get any.

what are these?

stuart mc

  • Posts: 7775
Re: air locks on flat tanks
« Reply #4 on: April 19, 2013, 11:39:17 pm »
As sunshine said, I got one fitted on each of my pumps from my flat tank,
Even when empty and fill up I don't get any.

what are these?


I would like to know as well

R.C Property

  • Posts: 1599
Re: air locks on flat tanks
« Reply #5 on: April 19, 2013, 11:42:53 pm »
basicly they are like a one way street, water can flow through one way, but wont run back.

these are the ones i have used, as all my tubing is house grade 22mm down to 15mm to pumps
http://www.toolstation.com/shop/Plumbing/Valves/Single+Check+Non+Return+Valve+15mm/d20/sd2696/p77952


another name for them are check valves.

andyM

  • Posts: 6100
Re: air locks on flat tanks
« Reply #6 on: April 20, 2013, 07:20:00 am »
Something like this for the 1/2" hose most of us use I reckon:
http://www.elyboatchandlers.com/water-system-parts-accessories/whale-1/2-non-return-valve

One of the Plebs

MATT BATEMAN (OWC)

  • Posts: 1821
Re: air locks on flat tanks
« Reply #7 on: April 20, 2013, 09:36:50 am »
Turn the tank isolating valve off at the exit point from the tank, assuming you have one, after you've finished cleaning, drive to next location, turn it back on.

Re: air locks on flat tanks
« Reply #8 on: April 20, 2013, 10:21:35 am »
What I would do besides the none return valve is fit the tank onto a wood base with a 1 to 2  inch lift towards the exit hole so all you water runs towards the exit hole when to tanks gets low.

Re: air locks on flat tanks
« Reply #9 on: April 20, 2013, 10:53:59 am »
Where would you fit the non return valve.i occasionally get an air lock .thats a good ip matt. Cheers barry .

SPE

Re: air locks on flat tanks
« Reply #10 on: April 20, 2013, 10:55:59 am »
What I would do besides the none return valve is fit the tank onto a wood base with a 1 to 2  inch lift towards the exit hole so all you water runs towards the exit hole when to tanks gets low.
or park on a hill

gto

  • Posts: 682
Re: air locks on flat tanks
« Reply #11 on: April 20, 2013, 10:57:38 am »
i fitted a hose inside the tank, so that it get down to the last half inch of water.
now the only time i get air locks is when i have drained the flter bowl out.

R.C Property

  • Posts: 1599
Re: air locks on flat tanks
« Reply #12 on: April 20, 2013, 03:29:22 pm »
Where would you fit the non return valve.i occasionally get an air lock .thats a good ip matt. Cheers barry .

mine are fitted just before each pump.