Ozone generators

« **on:** April 15, 2013, 06:47:53 pm »

Anybody use them ?
Was looking at this one http://www.ebay.co.uk/itm/PRO-Commercial-Ozone-Generator-10000mg-10g-Ozonizer-Air-Purifier-Sterilizer-/190787629617?_trksid=p3984.m2206&_trkparms=aid%3D222002%26algo%3DSIC.FIT%26ao%3D1%26asc%3D129%26meid%3D6984186722780095572%26pid%3D100052%26prg%3D1108%26rk%3D4%26sd%3D220805863465%26

Not sure about this - Neutralises odors and breaks down harmful chemical substances (Muff, tobacco and Animal smell, etc.)

« **Reply #1 on:** April 15, 2013, 09:37:12 pm »

Muff? They are good, but not that good.

« **Reply #2 on:** April 15, 2013, 10:09:32 pm »

I used to be great at breaking down muff, before I met the Mrs.

« **Reply #3 on:** April 15, 2013, 11:23:37 pm »

Mark if those figures are correct then that is very good value. Check it fully out first though.

« **Reply #4 on:** April 16, 2013, 08:55:46 am »

Not really sure what I should be looking for Paul,I need something that is able to do the average size 4 bed house,to take care of smoking smells and pet smells.
There are quite a few on e bay,that one looked the most up to the job.

« **Reply #5 on:** April 16, 2013, 10:56:02 pm »

So has anyone ordered one?

« **Reply #6 on:** April 17, 2013, 07:55:47 am »

They also do a more powerfull one thats a bit more pricey, but either will do the job for what you want . As long as they are genuine machines that is and not poope.
Dont forget that a karcher puzzi is a pro carpet cleaning machine ( in their marketing)

« **Reply #7 on:** April 17, 2013, 12:17:29 pm »

Worth a punt at that price, just ordered one. I'll let you know the verdict when it arrives.

« **Reply #8 on:** April 17, 2013, 02:41:30 pm »

Mine cost over a grand ten tears ago

« **Reply #9 on:** April 17, 2013, 03:44:47 pm »

Interesting... please let us know your thoughts!

« **Reply #10 on:** April 17, 2013, 04:13:19 pm »

Ask the cost of replacement plates and if they can be replaced. They sometimes fail and in the past I have tried to get machines fixed and it was easier to buy a new one.

« **Reply #11 on:** April 18, 2013, 08:15:39 am »

Ash
I always find muff breakdown much harder after a kick in the balls, so I hope your Mrs does nt read this post.
Muff breakdown, I have often considered adding this to my list of services on my sites can anybody see any pitfalls?

Peter
www.carpetcleanercardiff.com

« **Reply #12 on:** April 18, 2013, 12:10:06 pm »

I did e mail the seller asking about replacement plates,but she didn't really know what I was talking about.
Not really up on how they work myself,anyone care to go into a bit more detail,so sort of galvanic process where a current is passed through some plates ?
I know my mate had a galvanic isolator on his barge,but the one next to where his was moored had dodgy electrics and it stripped the paint off his in under a year !!

« **Reply #13 on:** April 18, 2013, 12:18:02 pm »

I would be relucantant to buy from a Company outside the UK

« **Reply #14 on:** April 25, 2013, 06:48:48 pm »

Well its arrived!! I’ll put some pics up in a bit and feedback after the weekends trial….

« **Reply #15 on:** April 25, 2013, 08:13:03 pm »

Quote from: Nick Attwood on April 25, 2013, 06:48:48 pm

Well its arrived!! I’ll put some pics up in a bit and feedback after the weekends trial….

I ordered my one 2 days ago... the tracking info is all in Polish

Hope its not a pile of rubbish!!!

« **Reply #16 on:** April 25, 2013, 11:40:55 pm »

let us know how you get on with them chaps

« **Reply #17 on:** April 26, 2013, 12:40:32 am »

Ok ordered it on the 17th of April via eBay and received on the 25th April via Parcel Force. It was well packaged the photo’s will tell the rest. So unpacked and installed the ceramic plates as required, also removed the supplied continental plug and replaced with UK 3 pin plug. Plugged in and all is fine!!! I am comparing this to a machine I had that was 3x the size, the smell of ozone Im getting from this is massive compared to my old machine. I know that is no technical experiment but don’t have the means to test scientifically. First impressions are very pleasing… Would be interested on JK or others views on obtaining replacement plates? Manufacturer from what i can gather is www.computercars.pl I have a few friends in poland whom I will get to contact for details.