This is an advertisementInterested In Advertising? | Contact Us Here
can't wait the review from Mark, i have no doubt that is good anyway.
Richard how much are the controllers. Do they work without the r/c as in will the pump switch off when you turn off the water at the brush. Also is it compatible with bigger pumps. I have a 12ltr pump from vyair. I burned out one controller with a similar pump a year ago.
I just don't see the point of one , I just turn tap at the end of pipe then pump controller turns pump of , why complicate things
Mark I have one of these pumps for a different job. Is it possible to get a controller that will handle the amount of amps it usesFlojet Pentaflex SeriesDIAPRAGM PUMP80 PSI (5.5 BAR) / 7.0 GPM (26.5 LPM)SPECIFICATIONSPump Design: 5 chamber diaphragmMotor Design: Permanent magnet DC Voltages: 12, 24 VDCMotor rating: IP 54 (splash proof)Amp Draw: 13.5 amps @ 10 psi for 12 VDC
Richard that is great, will you give me a price on one, I have two vyair 12ltr pumps with the pressure switch knackered, will your controller work the pump without the pressure switch. (my own fault the pressure switches blew)
not the easiest item to make a video on bit I tried my best http://www.youtube.com/watch?v=NjkbHnOEIMQhttp://www.youtube.com/watch?v=paneEQwMWbY
Thanks Richard
I have had my system remote controlled for the last five years, only for On/Off but couldnt work without it!got system from Fleabay bout £20.easy to fit and wire in...Simples....here's a similar one...http://www.ebay.co.uk/itm/12V-REMOTE-CONTROL-ON-OFF-SWITCH-2-REMOTES-10A-COMPLETE-KIT-FULL-INSTRUCTIONS-/190765295341?pt=UK_Gadgets&hash=item2c6a7f66edGoochie