[Blast Away]

Has anyone local got a number 1 clamp spare that I can buy and collect from you tomorrow(Sunday) or Monday(working in Chorley Monday).
I'll buy off the website but it won't be here until Tuesday/Wednesday.

I've managed to snap the original one on the HP pole I made.

Lee

[Gav Camm lammy 283]

Hp pole

[Blast Away]

Hp pole

High Pressure.

[Gav Camm lammy 283]

Superb

[Gav Camm lammy 283]

Think iv got one fr a clx 18 ??

[colin purewater]

I agree that's awesome!

I've got an old number 1 section you can have
It's got the screw thread on if that's any help ?

I'm down the right end of the lancs  

[Blast Away]

Bought the pole a month ago and followed suit to another member on here who made one. It's belting, but a lesson learnt when bringing the surface cleaner down due to the weight as it snapped the clamp. Also used fittings with either a turbo nozzle or fan nozzle which is lighter.
We cleaned stone sills 3 storey last week from the ground with this.

[Perfect Windows]

If you've snapped the clamp where it's already split (if that makes sense) you can easily get by for a few days with it taped up.  Seems odd but it definitely works.

Vin

[Blast Away]

I agree that's awesome!

I've got an old number 1 section you can have
It's got the screw thread on if that's any help ?

I'm down the right end of the lancs  

I'll keep you in mind but would prefer someone closer with just a clamp so I can glue on with araldite.

That roof was done from the ground too. Not the sort of tiles you wanna walk on!  

[Blast Away]

If you've snapped the clamp where it's already split (if that makes sense) you can easily get by for a few days with it taped up.  Seems odd but it definitely works.

Vin

Maybe so with a brush pal with up to 100psi flowing through but not with high pressure. The HP hose's ferrule locks in tight when the clamp is closed. Without this ferrule being tight the flow of water will make the whole fitting move.

[Gav Camm lammy 283]

Meet Colin at end of the lancs

[Dani J]

Hp pole

High Pressure.

How much did you charge for this roof cleaning Lee ?

[richard jagger]

Great results Blast away. What pressure do you use on those tiles and does the roof tiles not leak.

[paul marshall]

not local blastaway , but you can have a brand new one of me f o c , but im in huyton liverpool about 30 seconds from the m 62 so maybe a bit closer than colin but not much

[Blast Away]

Dani, that roof is a small extension on the side of a 6 bedroom house. We were there for gutter vac and jetted the downspouts with this pole from the ground. 2nd time customer. The roof took 10 minutes to do while my brother was on the vac, I charged £30 on top of the bill. If it would have been booked in solely for the roof tiles then obviously more.

Smithie, 15lpm at 200 bar.

[Deangsi]

Very nice job mate all you need to do now is pull all the tiles back down that got pushed up a little that's a hell of a good clean btw how much did you charge for that ? I used to be a roofer so anything roofline interests me 

[Blast Away]

Very nice job mate all you need to do now is pull all the tiles back down that got pushed up a little that's a hell of a good clean btw how much did you charge for that ? I used to be a roofer so anything roofline interests me 

Look closely pal, they're pushed up slightly before the clean. £30 as wrote above. 

[Gav Camm lammy 283]

Yes I agreed a fantastic looking
Job I'd defo have that on ya site
As a b4 and after

[Dani J]

Dani, that roof is a small extension on the side of a 6 bedroom house. We were there for gutter vac and jetted the downspouts with this pole from the ground. 2nd time customer. The roof took 10 minutes to do while my brother was on the vac, I charged £30 on top of the bill. If it would have been booked in solely for the roof tiles then obviously more.

Smithie, 15lpm at 200 bar.

Many thanks Lee.