[david knowles]

I have a Prochem Cheyenne the hose is to small for the machine end ! Is there a larger connector to the machine  if so where would I get one ?  also to join two hoses together would you use a metal connector or plastic ?  thanks in advance .
just booked for the Cleansmart Carpet cleaning course on thursday.

[Neil Jones]

You need an expander cuff, most carpet cleaning websites do them. To join to hoses together you need a plastic join. What size is your hose? I'm guessing it's 1.5 inch and you need it to be 2 inch to fit your machine. I could be wrong though, i've never owned a prochem. Check the link
http://www.worldofclean.co.uk/expander-cuff.html

[Neil Jones]

and check ebay

[david knowles]

My hoses are 1 1/2" but the machine fitting is bigger it has a barb fitting like the tail on the pump fittings but bigger.
 I was not sure if the 2" would fit on as it would be a screw fitting . hence the question
looks like the 2 " is the only thing I can find until someone tells me different.

[Fran84]

David the cheyenne takes to inch hose.

Cuff on the end of your hose should just push on!!

[Dennis]

2" slip x 1.5" thread adaptor cuff

http://www.cleansmartsupplies.co.uk/acatalog/Vacuum___Solution_Hoses.html

[Glynn]

Your 1.5" cuff might fit INSIDE the 2" machine fitting.

[Neil Jones]

Glynn is right, or at least you can with my machine. The 2 inch fits over the inlet pipe and 1.5 inch inside, quite handy really.

[robert meldrum]

Above posts are correct..............

I used a two inch cuff at the vacuum inlet with a short piece of 2" hose joining a second 2" cuff.  A suitable 1 1/2 " cuff with the shoulders rounded will fit inside the 2" inch cuff.

[david knowles]

I tried with the 1 1/2" cuff on the inside it would not go so i will try the 2" to the 1 1/2"
is this something the will sell at cleansmart in nottingham i am there on thursday.?

[Simon@arenaclean]

Yes cleansmart should have them,  i'm sure they will get you sorted.