[R.C Property]

got bored again tonight so decided to make a 12v 4 way distribution box,

nearly finished a prototype just need to pick up some connectors and a heavy duty negative wire then its done!

[Ryan @ Transparent, Carlisle]

Really tidys the job up.

Stripping van soon, new connecters & hot system, going to do something similar.

Plan to use a larger box, and use a copper connector block, like those you have in domestic.consumer unit. Take a 10mm wire fron battery to the connector. So when I need ti add a circuit, its just a matter of connecting to the block, inline fuse, and away you go

[evo]

hi mate if you don't mind me asking where do you get your plastic box's from
james

[R.C Property]

Really tidys the job up.

Stripping van soon, new connecters & hot system, going to do something similar.

Plan to use a larger box, and use a copper connector block, like those you have in domestic.consumer unit. Take a 10mm wire fron battery to the connector. So when I need ti add a circuit, its just a matter of connecting to the block, inline fuse, and away you go

yer it does, i got a smaller one set in my van for all my stuff. like you say keeps it all together!

[R.C Property]

hi mate if you don't mind me asking where do you get your plastic box's from
james

the grey box is from a electrical wholesaler and the fuse holder was from halfords.

[evo]

hi mate if you don't mind me asking where do you get your plastic box's from
james

the grey box is from a electrical wholesaler and the fuse holder was from halfords.

thanks mate

[R.C Property]

hi mate if you don't mind me asking where do you get your plastic box's from
james

the grey box is from a electrical wholesaler and the fuse holder was from halfords.

thanks mate

there are easier fuse holders about, that only needs one live wire to do all 4 on oneside, but that one in the pic was the only one i could pic up at short notice.