Interested In Advertising? | Contact Us Here
Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

chris scott

  • Posts: 3414
Fluropolymer on indian sandstone.
« on: December 21, 2012, 06:44:45 pm »
Fluropolymer on Indian sandstone. Anybody tried it? In theory it should work.It's breathable so moisture can escape from what is a very porous surface. Moisture peculates upwards from the substrate below...but it is hydrophobic so burger fat, red wine ,water cannot enter from above.
It is water soluble so no problem applying to a damp surface (Indian sandstone always has a high moisture content).
It is an impregnator so wear will not be a problem.It is also translucent so will not change the appearance of the stone will not change.    Anybody tried it? or know of the product?
 
www.cleaning-service.uk.com
www.render-cleaning.co
https://www.cleaning-service.uk.com/bromoco-systems/
Exterior cleaning specialists covering Merseyside,Lancashire and Cheshire. TEL 08000 933267

Roger Oakley

Re: Fluropolymer on indian sandstone.
« Reply #1 on: December 22, 2012, 08:56:27 am »
I would contact Smartseal Chris, as I am sure they are going to be putting out a sealer that can go on damp at some point next year, Good Luck with that.

chris scott

  • Posts: 3414
Re: Fluropolymer on indian sandstone.
« Reply #2 on: December 22, 2012, 09:15:28 am »
Sealers are no good Roger sandstone needs to breath. We should talk privately ...it would be to our mutual advantage.
www.cleaning-service.uk.com
www.render-cleaning.co
https://www.cleaning-service.uk.com/bromoco-systems/
Exterior cleaning specialists covering Merseyside,Lancashire and Cheshire. TEL 08000 933267

Roger Oakley

Re: Fluropolymer on indian sandstone.
« Reply #3 on: December 22, 2012, 09:32:00 am »
And that is why I said "Good Luck" with that, in my opinion Exterior Sandstone doesn't really need to be sealed, just a good maintenance program in place.
We will seal if the client really insists on it, but I'll only use impregnators.

chris scott

  • Posts: 3414
Re: Fluropolymer on indian sandstone.
« Reply #4 on: December 22, 2012, 09:37:09 am »
Do you use a "DuPont" impregnation system roger?
www.cleaning-service.uk.com
www.render-cleaning.co
https://www.cleaning-service.uk.com/bromoco-systems/
Exterior cleaning specialists covering Merseyside,Lancashire and Cheshire. TEL 08000 933267

Roger Oakley

Re: Fluropolymer on indian sandstone.
« Reply #5 on: December 22, 2012, 09:52:27 am »
No I don't, I would have a look in flooring section, as there are people on that side that will openly give advice on sealers, Kevin Martin for one.

chris scott

  • Posts: 3414
Re: Fluropolymer on indian sandstone.
« Reply #6 on: December 22, 2012, 09:55:36 am »
What do you use roger?
www.cleaning-service.uk.com
www.render-cleaning.co
https://www.cleaning-service.uk.com/bromoco-systems/
Exterior cleaning specialists covering Merseyside,Lancashire and Cheshire. TEL 08000 933267

Roger Oakley

Re: Fluropolymer on indian sandstone.
« Reply #7 on: December 22, 2012, 10:04:55 am »
Chris, not really prepared to put on here what we use sorry.
The only thing I will say is they are expensive, but work.

chris scott

  • Posts: 3414
Re: Fluropolymer on indian sandstone.
« Reply #8 on: December 22, 2012, 04:48:22 pm »
The ones you use are freely available on the open market then? If so why would you not recommend them?
www.cleaning-service.uk.com
www.render-cleaning.co
https://www.cleaning-service.uk.com/bromoco-systems/
Exterior cleaning specialists covering Merseyside,Lancashire and Cheshire. TEL 08000 933267

Roger Oakley

Re: Fluropolymer on indian sandstone.
« Reply #9 on: December 22, 2012, 06:43:51 pm »
The ones you use are freely available on the open market then? If so why would you not recommend them?

Why should I recommend a product and give out info? so that every tom, dick and harry can have the same knowledge without doing the slightest bit of research and testing for themselves.

Kenny83

  • Posts: 1131
Re: Fluropolymer on indian sandstone.
« Reply #10 on: December 22, 2012, 07:11:49 pm »
Resiblock indian stone sealer is one of those i think, cant remmeber exactly but that rings a bell, it's defintely not a PU though, it works great, it should do at £90 a gallon!
there are various others out there such as lithofin aswell
Pressure Washing -
www.powerwashcleaning.co.uk

chris scott

  • Posts: 3414
Re: Fluropolymer on indian sandstone.
« Reply #11 on: December 22, 2012, 09:02:52 pm »
 Roger ...I thought that was the whole point of this forum so people could swap ideas, recommend products,give an opinion on a subject?
Kenny... I have worked with Resiblock (the company and Resiblock the product) quite  a lot recently. I have been stripping driveways that have failed, nothing to do with there products (which are what i consider the best on the market)just application errors .Acrylics being applied over PU,s. Damp substrates with pu's applied.
 RESIBLOCK  '22'/A.F works well on Indian sandstone  the plus points is that it requires a certain amount of moisture to cure...this is one of the problems with sealing most substrates are never really completely dry.
The types of impregnators i wish to develop which i think suitable as they are waterbased  These would be basically teflon ...the coatings on frying pans .Hence the original post i wanted to see if anybody had experimented  with  Fluropolymer (teflon)
Please check out the following link http://www.neverwet.com/videos-news.php
Kenny how are you anyway?
www.cleaning-service.uk.com
www.render-cleaning.co
https://www.cleaning-service.uk.com/bromoco-systems/
Exterior cleaning specialists covering Merseyside,Lancashire and Cheshire. TEL 08000 933267

Jamie Pearson

  • Posts: 3407
Re: Fluropolymer on indian sandstone.
« Reply #12 on: December 22, 2012, 09:07:36 pm »
Most impregnator are fluoropolymer.
With the exception of silane based products such as Dry Treat Stain Proof.


chris scott

  • Posts: 3414
Re: Fluropolymer on indian sandstone.
« Reply #13 on: December 22, 2012, 09:13:47 pm »
So there are tried and tested products on the market that suitable to exterior use say for example on moisture rich sandstone? Will these products resist our english weather?
www.cleaning-service.uk.com
www.render-cleaning.co
https://www.cleaning-service.uk.com/bromoco-systems/
Exterior cleaning specialists covering Merseyside,Lancashire and Cheshire. TEL 08000 933267

Matt Gibson

  • Posts: 2482
Re: Fluropolymer on indian sandstone.
« Reply #14 on: December 22, 2012, 09:22:53 pm »
There are plenty of water based impregnating sealers on the market. i used to use drytreat stuff in australia for sandstone/brickwork and it was good stuff. there are other waterbased sealers out there too. most companoes make them.

There are some new sealers/anti graffiti coating out there now based on liquid glass. there are other companies apart from smartseal/resiblok.

Your asking about a sealer to use on sandstone but in your last post you said that resiblock 22 works good on exaclty that.

chris scott

  • Posts: 3414
Re: Fluropolymer on indian sandstone.
« Reply #15 on: December 22, 2012, 09:34:41 pm »
I appreciate there are other company's out there.  I am also aware that some company's  exaggerate  just how good there products are. Hence asking the question to contractors that actually use these products. I need to know about how viable  in terms of wear and tear,sensible application rates, application limitations etc.
With all due respect what works in Australia might not be suitable in our enviroment
www.cleaning-service.uk.com
www.render-cleaning.co
https://www.cleaning-service.uk.com/bromoco-systems/
Exterior cleaning specialists covering Merseyside,Lancashire and Cheshire. TEL 08000 933267

Matt Gibson

  • Posts: 2482
Re: Fluropolymer on indian sandstone.
« Reply #16 on: December 22, 2012, 10:47:15 pm »
I understand that but as i now live in scotland and have tried a few different sealers ive come to the conclusion that all sealers need re application. impregnating sealers are longer lasting and not nearly as badly affected by the weather.

chris scott

  • Posts: 3414
Re: Fluropolymer on indian sandstone.
« Reply #17 on: December 22, 2012, 10:57:07 pm »
Matt which ones are you using and how do you find them? You might find this  http://www.scottsprofessional.co.uk/uk/proshield.html  useful if you are doing block paving although strictly speaking it should not be due to possible run off . Used sensibly though it's very good.
www.cleaning-service.uk.com
www.render-cleaning.co
https://www.cleaning-service.uk.com/bromoco-systems/
Exterior cleaning specialists covering Merseyside,Lancashire and Cheshire. TEL 08000 933267

BDCS

  • Posts: 4777
Re: Fluropolymer on indian sandstone.
« Reply #18 on: December 22, 2012, 11:03:40 pm »
I can't be bothered with sealing - I use sealing to upsell the washing, "its cheaper to clean every other year than clean and reseal every five". I also tell them moss will grow on glass so how can a sealer work. I will only seal to enhance the colour if the customer really wants it and I happen to be in a good mood. I've not answered the original post have I ! Oh well its not quality street  ;D
I use PICS acrylic and resiblock PU - I find them by remembering that they are in the back of the container  :o

Roger Oakley

Re: Fluropolymer on indian sandstone.
« Reply #19 on: December 22, 2012, 11:08:20 pm »
Roger ...I thought that was the whole point of this forum so people could swap ideas, recommend products,give an opinion on a subject?
Kenny... I have worked with Resiblock (the company and Resiblock the product) quite  a lot recently. I have been stripping driveways that have failed, nothing to do with there products (which are what i consider the best on the market)just application errors .Acrylics being applied over PU,s. Damp substrates with pu's applied.
 RESIBLOCK  '22'/A.F works well on Indian sandstone  the plus points is that it requires a certain amount of moisture to cure...this is one of the problems with sealing most substrates are never really completely dry.
The types of impregnators i wish to develop which i think suitable as they are waterbased  These would be basically teflon ...the coatings on frying pans .Hence the original post i wanted to see if anybody had experimented  with  Fluropolymer (teflon)
Please check out the following link http://www.neverwet.com/videos-news.php
Kenny how are you anyway?

Chris I guess me & you will not see eye to eye how forums work, but that aside, if you are using Resiblock 22 on Sandstone and you say it has worked for you, then please let me know the results after say 1 year. Resiblock 22 is no more then a sand sealer for block paving (a glorified glue) and as a Resiblock contractor I think I know what I am talking about. 22 Does not need moisture to cure, surface and joins between pavers need to be bone dry, hence the sealing window in the UK can be a very short season, take this year for example. Resiblock natural stone sealers are OK-ish but there are better products out there, Lithofin is one, not cheap but you get what you pay for, Aqua-mix is also good on certain surfaces, again this is just my opinion after using/testing the above products.

People seem to think sealing exterior paving is easy money, do it right and it can be, do it wrong then it gets expensive putting it right.