Interested In Advertising? | Contact Us Here
Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

andy east sussex

  • Posts: 1146
parts ??
« on: December 15, 2012, 10:27:50 am »
what are the best jets to get for the twin jet s bend wand and also where can i get the inline filters from ??? and where to get the jets from ??


Re: parts ??
« Reply #2 on: December 15, 2012, 01:49:28 pm »
I should realy know this but can jets wear out and can this effect pressure (brass jets that is)

Dennis

  • Posts: 2044
Re: parts ??
« Reply #3 on: December 15, 2012, 02:33:51 pm »
Yes, look what water does to rocks and brass is quite soft so your hole gets bigger.  :o  ;D
Having said that I don't know how long the water takes to make a big difference at the wand.

andy east sussex

  • Posts: 1146
Re: parts ??
« Reply #4 on: December 15, 2012, 04:34:54 pm »
theres fibre jets isnt there ?

Len Gribble

  • Posts: 5106
Re: parts ??
« Reply #5 on: December 15, 2012, 06:16:08 pm »
Andy

This is what you need http://www.worldofclean.co.uk/in-line-filter.html

Or you could try amtech, Restormate, Ashby’s, thebigclean, cleansmart

I wouldn’t worry about jets unless you took a sharp object to them   :o ;)
Always bear in mind that your own resolution to succeed is more important than any other. (Sidcup Kent)

Carpet Dawg

  • Posts: 2968
Re: parts ??
« Reply #6 on: December 15, 2012, 07:27:32 pm »
I tend to change jets every 6 months, feel that i need too and I can see the difference when I do. Thats the brass ones though, never tried the steel ones. Does anyone know if they last longer?

Doctor Carpet (Ret'd)

  • Posts: 2024
Re: parts ??
« Reply #7 on: December 15, 2012, 10:23:36 pm »
Does it make any difference if you work in a hard water area?

I'm in a soft water area but I do work my wand for a about 4 hours a day 5/6 days a week and I find I start to think about replacing them at about the 12month period as pressure starts to drop. How often to guys in hard water areas change theirs?

Rog
Diplomacy: the art of letting other people have your way

Kinver_Clean

  • Posts: 1120
Re: parts ??
« Reply #8 on: December 15, 2012, 10:35:28 pm »
Stainless jets last several times longer than brass.
Mine have been in for 4-5 years and are still fine.
Might cost more but worth it by reducing the aggro.
God must love stupid people---He made so many.