[Dan Walker]

Hi All

Was after some advice, I have a Numatic BMD1000s just sitting in my garage is this suitable for agitation after presray. I believe it runs at150rpm.

If anyone has used or still owns one what plates and brushes do you find the most effective.

Thanks for your time

[Jamie Pearson]

It will be okay for this task.
If you have a drive board for it you can use one of the many pad/bonnets out there.
Pads are better for commercial loop pile.
Bonnets for cut pile and domestics.
Its worth getting a few different ones and playing around to find what works best with your chosen pre-spray/cleaner.