This is an advertisement
Interested In Advertising? | Contact Us Here

Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

andyralph

  • Posts: 369
unger resin
« on: August 07, 2012, 05:14:05 pm »
hi all can anybody tellme weather the resin from unger is any good thanks andy

Re: unger resin
« Reply #1 on: August 07, 2012, 06:01:35 pm »
it is very good, theres not much between unger and tulision

Dave.

  • Posts: 557
Re: unger resin
« Reply #2 on: August 07, 2012, 06:05:27 pm »
I'm on my third bag of it - I'm getting about 6500litres out of an 11litre DI only set up (TDS 40-50ish)


Re: unger resin
« Reply #3 on: August 07, 2012, 06:47:16 pm »
I'm on my third bag of it - I'm getting about 6500litres out of an 11litre DI only set up (TDS 40-50ish)



dave use a twin di set up and 6mm hose to fill up, I get about 30000 litres on a tap tds of 72


firefly123

  • Posts: 516
Re: unger resin
« Reply #4 on: August 07, 2012, 07:53:21 pm »
its good stuff
shiney one

d s windowcleaning

  • Posts: 2782
Re: unger resin
« Reply #5 on: August 07, 2012, 10:48:38 pm »
hi all can anybody tellme weather the resin from unger is any good thanks andy
do you use ro before ? resin only ? whats your tap tds ? static or van mount ?
Thers loads of factors to take in to account when buying resin and selecting a brand .
where theres muck theres money

Jonny D

  • Posts: 136
Re: unger resin
« Reply #6 on: August 08, 2012, 10:20:03 pm »
I'm on my third bag of it - I'm getting about 6500litres out of an 11litre DI only set up (TDS 40-50ish)



dave use a twin di set up and 6mm hose to fill up, I get about 30000 litres on a tap tds of 72



How do you set up a twin di setup? And how much litres would you get if you didn't do it that way and just had the one di vessel?

Dave.

  • Posts: 557
Re: unger resin
« Reply #7 on: August 08, 2012, 10:34:23 pm »
My water goes through DI before the pump, I used to have twin 11 litre DI's in series. 
But after a while of being lazy I found that the first DI had gone higher than my Tap TDS and was therefore making the 2nd DI last less than it would on it own.  I went back to single DI, I keep a tally of how much water I use and know roughly when it's going to be time to change resin, or to check the TDS more regularly.

If you search the old posts on here for twin DI there's bound to be more info

Dave