This is an advertisement
Interested In Advertising? | Contact Us Here

Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

steve prince

  • Posts: 240
First commercial job New
« on: July 27, 2012, 07:22:48 pm »
Ive got my first one in the morning 18x18 carpet tiles ,pretty manky ! cleaning suggestions please ,only got hwe  ???
thanks

Steve Barnett (Carpet Care Plus)

  • Posts: 1834
Re: first commercial job
« Reply #1 on: July 27, 2012, 08:30:32 pm »
Vacuum, vacuum and vacuum some more.

Pre-spray, agitate and thoroughly rinse, then get the air mover on each area as you finish it, assuming you have one.

Post bonnet if you have a rotary.

steve prince

  • Posts: 240
Re: first commercial job
« Reply #2 on: July 27, 2012, 08:38:59 pm »
cheers steve ,no rotary at the mo only a duo, but im looking into getting a oreck orbiter at some point.
what do you guys reckon for pre spray ? powerburst ?

Steve Barnett (Carpet Care Plus)

  • Posts: 1834
Re: first commercial job
« Reply #3 on: July 27, 2012, 08:48:33 pm »
Powerburst is fine, but as I said rinse thoroughly

Jamie Pearson

  • Posts: 3407
Re: first commercial job
« Reply #4 on: July 27, 2012, 08:53:31 pm »
Use lots of agitation and leave as little moisture in the carpet as possible to avoid wick back.


elliott cleaning

  • Posts: 778
Re: first commercial job
« Reply #5 on: July 27, 2012, 08:56:25 pm »
Only HWE available and agitation restricted to a Sebo Duo :-\ - I would be concerned for a first class result

steve prince

  • Posts: 240
Re: first commercial job
« Reply #6 on: July 28, 2012, 06:02:02 pm »
Only HWE available and agitation restricted to a Sebo Duo :-\ - I would be concerned for a first class result
Job went well and for a first attempt im pleased  :D . Oh and Elliot its not what you have it's the way you use it  ;)

garry22

Re: first commercial job
« Reply #7 on: July 28, 2012, 07:08:19 pm »
Quote
Job went well and for a first attempt im pleased  Cheesy . Oh and Elliot its not what you have it's the way you use it  Wink

Hopefully, everything will be OK.

Sadly in many cases, HWE on tiles can come back to haunt you a couple of days later when it dries out properly.

*Hector*

  • Posts: 9270
Re: first commercial job
« Reply #8 on: July 28, 2012, 07:11:34 pm »
I was gonna say that too Gary..

LM is the way on tiles..... perhaps you could use the money made on this job to buy a 2nd hand rotary ... I bought my 1st one off flea bay for £80 and it has more than paid for itself.... Just a thought  ;D ;D
Everyday this forum slips further from God.  :'(

steve prince

  • Posts: 240
Re: first commercial job
« Reply #9 on: July 28, 2012, 09:05:57 pm »
Well the water was black and left driers running through out ,so fingers crossed and im currently looking for a rotary ,what do you guys recommend for around £200?

Jamie Pearson

  • Posts: 3407
Re: first commercial job
« Reply #10 on: July 29, 2012, 08:02:22 pm »
Try to get a 17" (450mm) machine with a speed of 200 rpm or less. This will give you optimum results.
A drive disc, shampoo brush and water tank are also worth having.
Be careful if buying old Jeyes machines. Many spares like handles etc are now discontinued.

cannon

  • Posts: 492
Re: first commercial job
« Reply #11 on: July 29, 2012, 08:25:17 pm »
Try to get a 17" (450mm) machine with a speed of 200 rpm or less. This will give you optimum results.
A drive disc, shampoo brush and water tank are also worth having.
Be careful if buying old Jeyes machines. Many spares like handles etc are now discontinued.

You had to say that didnt you, i have a taski ranger which i think is a rebranded Jeyes??

I need a brush for it i dont suppose you sell them do you?

*Hector*

  • Posts: 9270
Re: first commercial job
« Reply #12 on: July 29, 2012, 08:26:35 pm »
I got one off flea bay for £65

 ;D ;D
Everyday this forum slips further from God.  :'(

TN Cleaning Services Ltd

  • Posts: 183
Re: first commercial job
« Reply #13 on: July 29, 2012, 09:02:59 pm »
Taski rangers and jeyes rotaries last for ever anyway.
I have a couple that i use for general daily use,
and several others that i have accumulated as backups.
The driveboards and brushes can be swopped either machine,
some are 240 volt and also have a 110 volt with transformer
which comes in handy in some places of work.


Jamie Pearson

  • Posts: 3407
Re: first commercial job
« Reply #14 on: July 29, 2012, 09:13:38 pm »
Woodbridge can help with pad holders, brushes etc. Its some of the other parts that are dis. rotaries rarely go wrong so you should be okay.