[Crystal-clear]

i used to run in at 39psi the last month or so im running it at 55 or even 60 sometimes....,its about a year old now got it from gardiners.

its not an air lock maybe calibration? but i did set it at 30 CAL for ages it didnt seem to fix it for ,

could it be that the battery or pump on the way out?
batt is about 2 years old now but my last one was 6 years old.

[Window Washers]

I would check the battery is holding charge because that is what it sounds like is the problem

[dazmond]

i have mine on 60 all the time with no problems.pure freedom digiflow(same as gardiners).

[Window Washers]

i have mine on 60 all the time with no problems.pure freedom digiflow(same as gardiners).

do you waste a lot of water Dazmond ? as 60 seems a little high

[Crystal-clear]

39 was the way forward till recently ... so you recon my battery is on the way out? its just when i recharge it up so its full power the problem remains the same!

[Window Washers]

39 was the way forward till recently ... so you recon my battery is on the way out? its just when i recharge it up so its full power the problem remains the same!

this may sound stupid but have you checked your inline filter is not blocked ?

[dazmond]

i use microbore as well ian so the flow is probably not as high as minibore.my 350L TANK lasts all day most days.i do trad the odd ground floor windows though and use an aqua-daptor.

[Steve CM]

I've had this many times and normally find the pump is in its way out. Soon as u replace the pump there is good pressure at a low number

[Crystal-clear]

I've had this many times and normally find the pump is in its way out. Soon as u replace the pump there is good pressure at a low number

ah i see ;/ its only a year old, how long do you think it should last ? well at 55psi its running ok guess when it gets alot higher ill have to replace it too much water waste