[Doug Holloway]

Hi Guys

I have an enquiry to clan and polish a marble floor.

I have two rotaries one 4560 and the other 180.

I also have a spinner attached to a Truck Mount, what woyuld you recommend.

Obviously I would avoid anything acidic.

Cheers

doug

[Nigel_W]

Hi Doug,

I would recommend a training course.

Nigel

[craignozza]

What kind of marble is it?

[Jamie Pearson]

Is it definately marble?

Don't run the spinner above 800psi. In fact only use it if you don't have a squeegee.

[mark shannon]

Doug a good clean and rinse followed by Klindex polishing powder with 150rpm with a natural fibre pad should do the trick.

 But short of a training course take a pic send it to Kev and he will tell you what to.

mark

[Doug Holloway]

Hi Guys

I am aware that I am out of my comfort zone and need to attend a training course.

However I am pretty busy with CC and don't know whether to do one.

Thanks for the replies.

Cheers

Doug

[RichardBardsley]

Speak to Crawshawd or commonly known as the Stone Doctor, just Google it They will advice you and supply.

[Kev Martin]

Hi Guys

I am aware that I am out of my comfort zone and need to attend a training course.

However I am pretty busy with CC and don't know whether to do one.

Thanks for the replies.

Cheers
T
Doug

Doug

If you are really busy with the CC then just send me a few pictures and I will see if I can help.

Kev Martin
Marblelife Ltd