This is an advertisement
Interested In Advertising? | Contact Us Here

Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

sean84

Another bulls up... CLX advice?
« on: April 05, 2012, 05:09:13 pm »
Seem to be making a few mistakes with my CLX just lately. Last week I broke the brush socket  :(

Today I was doing a first clean, scrubbing the upstairs windows and all of a sudden the clamp for the angle of the brush came undone and the brush wacked against the window. This was a genuine mistake and I thought the bolt was tightened. Luckily no damage was done  :)

Anyway, how often do you finger tighten the bolts? Has this happened to anyone else?!

Frankybadboy

  • Posts: 9024
Re: Another bulls up... CLX advice?
« Reply #1 on: April 05, 2012, 05:16:30 pm »
nope :o

SB Cleaning

  • Posts: 4336
Re: Another bulls up... CLX advice?
« Reply #2 on: April 05, 2012, 05:26:05 pm »
Nor me

dazmond

  • Posts: 24438
Re: Another bulls up... CLX advice?
« Reply #3 on: April 05, 2012, 05:39:32 pm »
no me neither!if you use a normal standard angle adaptor there should be small "teeth" that grip the clamp together at  your chosen angle.make sure they fit in between the teeth properly then tighten.i use a flipfast with no problems.

ive never broke a brush socket in 2 years of wfp!


one thing that has happened to me on both the clx and slx poles is the odd clamp coming unstuck and needing re glueing and both poles the screw thread the angle adaptor screws onto kept coming loose.i fixed them with some araldite.good as new now.

you will always get some little niggle with a pole you use day in/day out but luckily they are very easy to fix.


best wishes


dazmond
price higher/work harder!

SB Cleaning

  • Posts: 4336
Re: Another bulls up... CLX advice?
« Reply #4 on: April 05, 2012, 05:44:17 pm »
Flip fast is what ya want mate ;)

dd

  • Posts: 2623
Re: Another bulls up... CLX advice?
« Reply #5 on: April 05, 2012, 05:47:30 pm »
I find the pole clamps need adjusting regularly (assume this is the same sort of clamp you are referring to).

Following a recommendation on here I find putting 2 wraps of ptfe tape around the bolts prevents them from working loose too often..

sean84

Re: Another bulls up... CLX advice?
« Reply #6 on: April 05, 2012, 06:15:36 pm »
no me neither!if you use a normal standard angle adaptor there should be small "teeth" that grip the clamp together at  your chosen angle.make sure they fit in between the teeth properly then tighten.i use a flipfast with no problems.

ive never broke a brush socket in 2 years of wfp!


one thing that has happened to me on both the clx and slx poles is the odd clamp coming unstuck and needing re glueing and both poles the screw thread the angle adaptor screws onto kept coming loose.i fixed them with some araldite.good as new now.

you will always get some little niggle with a pole you use day in/day out but luckily they are very easy to fix.


best wishes


dazmond

The teeth were all clamped together nicely, but whats a flipfast?

The socket broke as I had the pole extended leant against a wall and turned around to turn the flow off the pole smashed onto the floor. Luckily got the part needed next day!

andyM

  • Posts: 6100
Re: Another bulls up... CLX advice?
« Reply #7 on: April 05, 2012, 06:25:10 pm »
You don't need a Flipfast if you already have the Gardiners Quick Release Resi-Neck.  8)
One of the Plebs

DeLuce

  • Posts: 1153
Re: Another bulls up... CLX advice?
« Reply #8 on: April 05, 2012, 06:29:39 pm »
If it's a new pole, then you shouldn't need to nip them up very often. Just be careful not to overtighten them at the start as you can knacker the plastic thread on the nut. If you do have the habit of overtightening the clamp, you will find they will need nipping up more often as you will stretch and wear the thread of the plastic barrel shaped nut ;D

SB Cleaning

  • Posts: 4336
Re: Another bulls up... CLX advice?
« Reply #9 on: April 05, 2012, 06:30:33 pm »
You don't need a Flipfast if you already have the Gardiners Quick Release Resi-Neck.  8)
Sorry didn't realise the op had the resi-neck ;D

Mike #1

  • Posts: 4668
Re: Another bulls up... CLX advice?
« Reply #10 on: April 06, 2012, 07:28:31 am »
If ur been to heavy handed and clashing ur pole about abit . It will cause u problems .  If you are not fully opening clamps when extending and collapsing pole you will cause wear on the sections .  Their is not a need to be scrubbing windows heavily if that is the case just take ur time and take care ur pole .

I used to be heavy handed and my first pole got some major abuse and it only lasted 6 months .   

If i am wrong mate i apologise in advance . Mike

sean84

Re: Another bulls up... CLX advice?
« Reply #11 on: April 06, 2012, 08:24:49 am »
If ur been to heavy handed and clashing ur pole about abit . It will cause u problems .  If you are not fully opening clamps when extending and collapsing pole you will cause wear on the sections .  Their is not a need to be scrubbing windows heavily if that is the case just take ur time and take care ur pole .

I used to be heavy handed and my first pole got some major abuse and it only lasted 6 months .   

If i am wrong mate i apologise in advance . Mike

I wasn't being heavy handed, I must not of tightened the bolt up properly after adjusting the angle (my mistake) will have to check they're tight a couple of times a day to make sure it doesn't happen again.