This is an advertisement
Interested In Advertising? | Contact Us Here

Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

H h20

Replacement poles
« on: January 09, 2006, 03:54:46 pm »
I`m looking for a couple of replacement poles "without the brush and hose",i know gardiner pole systems do them but is there anywhere else?,Cheers,Gaz

s.hughes

Re: Replacement poles
« Reply #1 on: January 09, 2006, 04:57:33 pm »
What about the unger poles? Wintec do them.

Steve

H h20

Re: Replacement poles
« Reply #2 on: January 09, 2006, 05:51:12 pm »
What about the unger poles? Wintec do them.

Steve
I`m using them now,i want the poles with the clamps not the thread,Gaz

Re: Replacement poles
« Reply #3 on: January 10, 2006, 03:44:26 pm »
brodex sell just poles.

H h20

Re: Replacement poles
« Reply #4 on: January 10, 2006, 05:05:14 pm »
Ive` just put this together,what do you think,Gaz

s.hughes

Re: Replacement poles
« Reply #5 on: January 10, 2006, 07:11:14 pm »
Gaz, Where did you get the pole from?

Steve

H h20

Re: Replacement poles
« Reply #6 on: January 10, 2006, 08:16:46 pm »
Gaz, Where did you get the pole from?

Steve
I got it from my local supplier,Gaz

ScrimShady

  • Posts: 647
Re: Replacement poles
« Reply #7 on: January 10, 2006, 08:28:07 pm »
looks good gaz!! i am very interested in how you set it up and where you got it from.
you can email me on richa479@aol.com or ring 07784039497

neil100

  • Posts: 1137
Re: Replacement poles
« Reply #8 on: January 10, 2006, 08:31:05 pm »
Where is rhe brush head from Gaz.

Nel

H h20

Re: Replacement poles
« Reply #9 on: January 10, 2006, 08:51:40 pm »
Where is rhe brush head from Gaz.

Nel
It`s from my local cleaning supplier,they don`t come as a wfp brush i just drill a couple of small holes remove a few bristles and fit a couple of 4mm jets,i`ve always used these brushes on my poles they are perfect and very affordable,Gaz

neil100

  • Posts: 1137
Re: Replacement poles
« Reply #10 on: January 10, 2006, 09:02:14 pm »
What was the total cost to build Gaz?

How long did it take you?

Nel

H h20

Re: Replacement poles
« Reply #11 on: January 10, 2006, 09:06:55 pm »
What was the total cost to build Gaz?

How long did it take you?

Nel
It cost me about £40 all in,but thats with my discount,and it took about half an hour to do,Gaz

Jeff Brimble

  • Posts: 4347
Re: Replacement poles
« Reply #12 on: January 10, 2006, 09:53:39 pm »

H h20

Re: Replacement poles
« Reply #13 on: January 10, 2006, 09:59:54 pm »
Gaz seen the tip in this http://www.cleanitup.co.uk/smf/index.php?topic=15080.0
Ye thanks Jeff,im just testing it out to see if i like the hose on the outside as ive always had the hose running inside,ive found some plastic clips that are used for wet and dry cleaners for holding the hose to the pole they seem to be doing the trick,i`ll be using it tomorrow to see how it goes,Gaz

thewindowcleaner1

  • Posts: 779
Re: Replacement poles
« Reply #14 on: January 10, 2006, 10:16:25 pm »
Like the pole is that a two section one if so can you get Three x 6ft ones ??
Also can you buy the clamp section seperate ??
Can you buy the clamp parts seperate ??

I prefer hose up the centre of pole less thing dangling in the wind, less to catch anything and break..

The secret is not doing as you like but liking what you do
www.thewindowcleaner.biz

H h20

Re: Replacement poles
« Reply #15 on: January 10, 2006, 10:20:54 pm »
Like the pole is that a two section one if so can you get Three x 6ft ones ??
Also can you buy the clamp section seperate ??
Can you buy the clamp parts seperate ??

I prefer hose up the centre of pole less thing dangling in the wind, less to catch anything and break..


A up Alan,nice to see you back,
the pole is only avaliable in a 2x2 meter and no spares :-\
but www.gardinerpolesystems.co.uk do poles to your requirement and spares to,im going to be ordering one from there ,Gaz

neil100

  • Posts: 1137
Re: Replacement poles
« Reply #16 on: January 11, 2006, 10:31:53 pm »
Gaz,

Can you post another pic of the trigger you have at the bottom of your pole?

Can you explain how you attached trigger and were to buy?

Nel.

H h20

Re: Replacement poles
« Reply #17 on: January 12, 2006, 04:20:34 pm »
Gaz,

Can you post another pic of the trigger you have at the bottom of your pole?

Can you explain how you attached trigger and were to buy?

Nel.
Neil,heres a couple of pics of the trigger and how it`s attached to pole and connects to hose,
it`s off a numatic wet n dry carpet cleaner, the connectors are pro push fit and i use 6mm hose and then about 6ft of 4mm hose that goes to the trigger connector with a very small piece of 6mm hose to connect together and a push fit connector,
i would not do with out a trigger i find it`s so easier and the water is on and off at my control,
if you need anymore info just ask,Gaz ;)

H h20

Re: Replacement poles
« Reply #18 on: January 14, 2006, 09:02:21 am »
Neil did you look at the trigger?,Gaz

Nick_Thompson

  • Posts: 810
Re: Replacement poles
« Reply #19 on: January 15, 2006, 09:46:02 pm »
Hi Gaz

I have a sack barrow type trolley with a 40 p.s.i. pump, 7 AH battery, micro chip flow control and it carries two 25 lts containers.

The problem is that the sack barrow is not man enough for the job.

I’ve also thought about upping the pump and battery.

It looks like you have already done this with the same sack barrow I was thinking of using.

I would be really interested in how you went about building yours.

A picture would be just too kind.

Thanks. 

Nick.
Do quantum mechanics fix old transits?

And let us not forget, voyeurism is an occupational hazard that we simply must endure.