[H S and Son]

Anyone got any idea where I can find a push-fit hosereel tap? All the push-fit ones seem to be for pole hose and not hose-reel (thus only accepting a smaller bore of hose)

TIA

Matt

[bobplum]

what size hose reel

[H S and Son]

6mm internal

[H S and Son]

Anyone?

[Gav Camm lammy 283]

pure freedom hose  comes with a tap

[Gav Camm lammy 283]

hose reel fitting kit

[H S and Son]

Thanks Gav. Cant find anything on their site, might have to settle for non push-fit.

[gto]

Why do you need a push fit tap.
Cantyou buy a standard tap with hose tails off ebay and swap bits to what you need

[Gav Camm lammy 283]

sorry didnt read correctly
i was thinking you meant
the tap valve which if you click
on pf site under hose reels
theres a tap bout 15ish quid
but not push fit

[H S and Son]

Why do you need a push fit tap.
Cantyou buy a standard tap with hose tails off ebay and swap bits to what you need

Just want it as simple as possible, no jubilee clips. I was hoping for a pole-hose type plastic tap but with a larger bore.

[dd]

IMO a pushfit on the end of your hose is more likely to leak. I found using Gardiners push fit pole valves a pain because they always seem to have a small leak so stopped using them now and just use a tap on end of hose which is O-ring clamped on.

[H S and Son]

Ive been playing with a microbore push fit tap. Quite frankly it balls. ;0) Naymind, I'll revert back to my original plan. Thanks anyway fellas.

[richard jagger]

Matt try Aquafactors I saw one 8 mm there. It was pricey though.

[H S and Son]

Cheers, I'll pop in there. There's those engineer suppliers in Goat Lane too. They're useful for allsorts.