Interested In Advertising? | Contact Us Here
Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

AshWhite

  • Posts: 3427
Equipment
« on: February 29, 2012, 09:34:03 am »
I'm looking at investing in some gear for my carpet (and soon to be hard floor) setup.

I'm currently running:
A truckmount
A rotary (Nilfisk SD-2 If I remember rightly) - 190rpm and 32kgwith a few different colour pads
SEVERAL Rotowash CRBs (Various sizes)
Vacuum Cleaner  ;D
Mops & Buckets

Now, my aim it to increase the amount of hard floors, whilst also improving my commercial carpet cleaning capabilities (I'm thinking possibly encap cleaning).

I need help trying to decide between, and prioritise some of the following:

Hard floor wand for truckmount
Cimex or OP Machine (Heavy duty, not Oreck/Floormac) - Which would be best?
Floor spinner
Gekko Tool with various heads

If someone could offer some words of advice I'd be very grateful. Particularly about Cimex vs Oscillating Pad - what are your feelings with these re: Hard floor cleaning/restoration?

Many thanks,

Ash
Carpet Cleaning http://www.floors2show.co.uk
Google Adwords Management http://www.pagecrest.co.uk

Floor_Tony

  • Posts: 156
Re: Equipment
« Reply #1 on: February 29, 2012, 03:21:03 pm »
Which Cimex are you looking at?
www.marblelife.co.uk | 0121-773-2450 | 07584-674006
www.tilinglogistics.co.uk

AshWhite

  • Posts: 3427
Re: Equipment
« Reply #2 on: February 29, 2012, 03:24:54 pm »
Whatever comes up used, but probably a CR48 ideally.
Carpet Cleaning http://www.floors2show.co.uk
Google Adwords Management http://www.pagecrest.co.uk

Steve Barnett (Carpet Care Plus)

  • Posts: 1834
Re: Equipment
« Reply #3 on: February 29, 2012, 05:39:25 pm »
I wouldn't bother with a hard floor wand if you're getting a spinner

Maybe get a wet vac pick up for when you can't use the truckmount

Steve Barnett (Carpet Care Plus)

  • Posts: 1834
Re: Equipment
« Reply #4 on: February 29, 2012, 05:40:49 pm »
CR48 is a great machine and very versatile, can be used for encapping carpets and cleaning rugs

AshWhite

  • Posts: 3427
Re: Equipment
« Reply #5 on: February 29, 2012, 05:55:09 pm »
I know they're great for encap, I was wondering how they are for hard floors?
Carpet Cleaning http://www.floors2show.co.uk
Google Adwords Management http://www.pagecrest.co.uk

Jamie Pearson

  • Posts: 3407
Re: Equipment
« Reply #6 on: February 29, 2012, 06:04:10 pm »
I can convert a Cimex into a Planetary Grinder for you.

We have built 2 ourselves from used machines and Truvox's parts bins.

The new US built CR48s actually have locators for weight kits not available to UK market but I can source them.

We use our cimex machines for encap, rugs, stone.

I own 5 of em in various flavours.

AshWhite

  • Posts: 3427
Re: Equipment
« Reply #7 on: February 29, 2012, 06:09:51 pm »
I'm on the Alltec SMT course next week through TACCA, I don't think I'll be massively into restoration - but I do have some good leads into local car showrooms so I want a unit suitable for that sort of thing and the occasional bit of heavier duty use. Woyld the standard brushes available for the cimex be OK?

Whaats your take on OP Machines for hard floors Jamie?
Carpet Cleaning http://www.floors2show.co.uk
Google Adwords Management http://www.pagecrest.co.uk

Jamie Pearson

  • Posts: 3407
Re: Equipment
« Reply #8 on: February 29, 2012, 06:26:35 pm »
In all honesty I have never tried them.

Every other grinding/polishing machine on the planet is planetary so there must be a good reason.

I would love to be able to justify a HOS Orbot for carpet works but at the moment i have 100+ machines.

For cleaning of car showrooms I would look at a Truvox Multiwash. A good CRB and a spinner tool/hard floor wand on a TM you will be flying.

Yellow Cimex Brushes are best for floors IMO.

Billy Russell

  • Posts: 1620
Re: Equipment
« Reply #9 on: February 29, 2012, 10:02:39 pm »
I disagree about the multiwash, if it was for a light maintenece clean, fine!! But i find its not heavy duty enough, i would lean more towards the karcher BR400,

Just my opinion of course!  ;)

AshWhite

  • Posts: 3427
Re: Equipment
« Reply #10 on: February 29, 2012, 10:12:06 pm »
Yeah that's my worry - but I could get a set of firmer brushes for the Rotowash?

I couldn't get in the Jester Bill, so I've booked the Coach House instead. Its only 2 miles from Alltec, but I bet there's feck all else round there!
Carpet Cleaning http://www.floors2show.co.uk
Google Adwords Management http://www.pagecrest.co.uk

Billy Russell

  • Posts: 1620
Re: Equipment
« Reply #11 on: February 29, 2012, 10:17:49 pm »
your right, there is feck all else around!!!! hahaha

its sat in the middle of nowhere!!!

 ;D ;D

Jamie Pearson

  • Posts: 3407
Re: Equipment
« Reply #12 on: March 01, 2012, 09:17:49 am »
I disagree about the multiwash, if it was for a light maintenece clean, fine!! But i find its not heavy duty enough, i would lean more towards the karcher BR400,

Just my opinion of course!  ;)

We run ours with the Blue Brushes and no waste tank so it drops solution back onto floor for added dwell.

The tanks arent big enough for restoration cleaning. We just use it for scrubbing.

BR400 is a good bit of kit. Just dont fill both tanks up to increase the weight. Our rep (at the time) did that when he demo'd the machine to us and blew it up. Why do these things always happens on demos.

Shaun_Ashmore

  • Posts: 11382
Re: Equipment
« Reply #13 on: March 01, 2012, 07:03:44 pm »
I've got an OP and it's bloody brilliant on hard floor it's so fast, I usually use a rotary and keep going over and over bits but the OP does it in one go.

Shaun

AshWhite

  • Posts: 3427
Re: Equipment
« Reply #14 on: March 01, 2012, 07:06:21 pm »
I know Shaun, I'm interested in yours still, but can't quite justify the £ at the moment.

What sort of work have you done with it Shaun? Just T&G cleaning, or something more industrial?
Carpet Cleaning http://www.floors2show.co.uk
Google Adwords Management http://www.pagecrest.co.uk

Shaun_Ashmore

  • Posts: 11382
Re: Equipment
« Reply #15 on: March 01, 2012, 07:21:12 pm »
I've done a few T and G's I like it because it gets more into the grout which saves my knees loads and also plenty of Altro etc floors I should push it more because it is easy money but I have a large carpet cleaning database the hard floors are just for something different.

Shaun

AshWhite

  • Posts: 3427
Re: Equipment
« Reply #16 on: March 01, 2012, 07:31:39 pm »
If you sell it Shaun, what'll it come with?
Carpet Cleaning http://www.floors2show.co.uk
Google Adwords Management http://www.pagecrest.co.uk

Shaun_Ashmore

  • Posts: 11382
Re: Equipment
« Reply #17 on: March 01, 2012, 07:46:04 pm »
Machine comes with drive pad fixed you then add hard floor brush it's on velcro and some carpet floaters which are put under the pad for carpet cleaning if you are using cotton bonnets if like me you prefer 'proper' bonnets then they aren't needed.

Shaun

AshWhite

  • Posts: 3427
Re: Equipment
« Reply #18 on: March 01, 2012, 08:10:11 pm »
Whats your definition of 'proper' bonnets? Do you mean the firmer type as opposed to the towel type? What size do you use?

For hard floors, is it possible to use coloured pads at all?

Just watching the video on the website, do you have the different types of gliders?

Sorry for all the questions, but i have 0 experience with OP machines
Carpet Cleaning http://www.floors2show.co.uk
Google Adwords Management http://www.pagecrest.co.uk

Shaun_Ashmore

  • Posts: 11382
Re: Equipment
« Reply #19 on: March 01, 2012, 09:36:40 pm »
I use dry fusion bonnets because I like them, you can use any pad or scotchbrite pad 15" but 17" are better IMO, there are 3 gliders but I don't think they are any good anyway.

Shaun