This is an advertisement
Interested In Advertising? | Contact Us Here

Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

Pages: [1]

johnny bravo

  • Posts: 2713
outside tap fitting
« on: February 24, 2012, 06:08:08 pm »
when fitting a new outside tap,   is there a place to fit the tap to cut into copper pipe,    is it best to fit it high up   or wont it matter
Logged

johnny bravo

  • Posts: 2713
Re: outside tap fitting
« Reply #1 on: February 24, 2012, 06:09:02 pm »
someone said above the waste ubend under sink
Logged

d s windowcleaning

  • Posts: 2782
Re: outside tap fitting
« Reply #2 on: February 25, 2012, 09:09:19 am »
it wont matter where you fit it , but if you do it low then the tap on the outside will be low to the ground . above the waste bend would give you a decent height for where the tap is fitted outside .
Logged
where theres muck theres money

johnny bravo

  • Posts: 2713
Re: outside tap fitting
« Reply #3 on: February 26, 2012, 08:04:47 pm »
ready to fit today, the one from b+q,   my good lady dosent want that one with hosepipe showing, i have to get the one with the copper pipe in pack,  all conects inside,  just shows tap on wall outside flush.
Logged

anz peat

  • Posts: 13
Re: outside tap fitting
« Reply #4 on: February 29, 2012, 10:04:47 am »
It does matter much if you are fitting it low.
Logged

johnny bravo

  • Posts: 2713
Re: outside tap fitting
« Reply #5 on: February 29, 2012, 07:34:55 pm »
does this way lessen your pressure much
Logged

spongebob

  • Posts: 433
Re: outside tap fitting
« Reply #6 on: February 29, 2012, 08:01:23 pm »
Quote from: johnny bravo on February 29, 2012, 07:34:55 pm
does this way lessen your pressure much


You will probably have at least 3 bar pressure if we are talking mains water. Let loose and pointing upwards that would reach about 30 meters high so no it wont make any difference to your pressure.
Logged

David Lingard

Re: outside tap fitting
« Reply #7 on: March 13, 2012, 04:58:04 pm »
...not that it matters but id be looking at 2 bar pressure tops..

Anyway just go on ebay and get yourself a wall tap screw attachment: example

http://www.ebay.co.uk/itm/BASIC-OUTSIDE-GARDEN-TAP-C-W-THROUGHWALL-FLANGE-ETC-/110768785456?pt=UK_DIY_Materials_Plumbing_MJ&hash=item19ca558830

turn off your water and tee in wherever you want. Be prepared for the pipes to empty where you tee in though....

Personally solder joints are best as they never leak when done right, but if you are putting the tee somewhere you can see it compressions will do fine..

Logged
Pages: [1]