[firefly123]

i used to take out the old resin wash di through then fill to neck put a bit of water in then put the filter back then screw top down seemed to me that there was still room for more resin  so  let it settle put some more in up to the neck get pure water strait a Way AS OPPOSED TO WAITING 5 MINS FOR IT TO FLUSH THROUGH

[Llaaww]

A gutter hopper fits perfectly into the hole and protects the threads.

Fill the bottle and tamp down until full, then rinse and fill again. Add a bit more water and fit the riser.

Just before screwing the top on give the threads a final thorough rinse, and screw it up.

[rscleaningservices]

sounds hard work to me gald I dont have to mess around with resin I just change my 3 filters about every year n half and membranes about 3-5 years !!!!!!!!!!!!!!!!!!!!!!!! aint that right Mr Bones !!!!!!!!!!

[SPE]

just changed my di this afternoon
I pour the used resin into a bucket (noting how much is in the bucket) and wash out the vessel, then ditch the resin in a bin bag and clean the bucket.

pour a similar amount of new resin into bucket add ro water (quite alot so the resin is runny when mixed )
give it a stir and pour it into vessel, when what gets left in bucket gets too sludgy add more water and repeat.

takes the ballache out of using a funnel and a scoop (as I used to) Simon