Interested In Advertising? | Contact Us Here
Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

stevef

  • Posts: 160
Re: Small DI Vessel Wanted
« Reply #20 on: November 08, 2005, 08:35:43 pm »
Mat
This has been a usfull debate and I thank you all for your input,
it's through this forum we all learn
But just to confirm you use your water from the RO into barrels
and no DI Correct?

Re: Small DI Vessel Wanted
« Reply #21 on: November 08, 2005, 08:51:34 pm »
Tosh if you had a di 25ltr on the in you come form an outside tap and out into you static tank yes you could make pure water in seconds but it would cost a bit in resin

Re: Small DI Vessel Wanted
« Reply #22 on: November 08, 2005, 09:19:50 pm »
There are two ways to make "pure water"

If you water supply has a low TDI and after going through a reverse osmosis system you could have 000 water even if it comes through 000-12max you could use this every time WITHOUT any Di vessels.

If you do not have a reverse osmosis system you could make 000 water through Di as well.

To do it through di you would need one 25ltr vessel for filling into your tank or water carriers ,bottles etc and then another 25 di vessel from your water containers through the pole.

The reason for the di filler is because you wouldnt be able to remove as much minerals this way than a reverse osmosis.

Also using resin only depending on how much water you use then the cost varies.

When i first started i had one di filler and was running two di for two poles.

We got up to using 700ltr of water each day but three vessels needing filling with new resin every 2-3 weeks costing £300.oo plus so reverse osmosis is the more economically way to do it.

matt

Re: Small DI Vessel Wanted
« Reply #23 on: November 08, 2005, 10:30:20 pm »
Mat
This has been a usfull debate and I thank you all for your input,
it's through this forum we all learn
But just to confirm you use your water from the RO into barrels
and no DI Correct?

No, i just have a small DI after the RO

so the water goes into my rain water butt at 000 TDS then i draw it off into 25 L barrels

Re: Small DI Vessel Wanted
« Reply #24 on: November 08, 2005, 10:39:38 pm »
Hi,

Have a look at our website at http://www.andwat.co.uk/acatalog/MISCELLANEOUS.html to see the three sizes of demin columns that we do - 17", 22" & 35" high.  They MUST be used upright, to prevent channeling.  Our carriage charges are way below what you mentioned.

Hope this helps, Andrew