Interested In Advertising? | Contact Us Here
Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

garybristow

  • Posts: 485
powerburst question
« on: August 16, 2011, 04:10:20 pm »
ive read that powerburst is not suitable for wool or wool mix?
ive been using on manky wool carpets with an acid rinse to great effect
what other chemical takes the place of p-burst?
also i load my t-mount with fibre & fab rinse,is there something cheaper i can use?
Gary Bristowclean

Warren Aldridge

  • Posts: 260
Re: powerburst question
« Reply #1 on: August 16, 2011, 04:17:31 pm »
I use rinse organic X from cleansmart. Dilutes at 200:1
I put about 500ml into the 5 gallon jug and set the flow to 1.5. lasts ages and neutralizes fine

steven Banks

Re: powerburst question
« Reply #2 on: August 16, 2011, 05:05:18 pm »
It should be ok so long as you acid rinse. Have you considered high heat as an acidic rinse?
If the carpet is manky then you need something with abit umph.

Maybe try fusion 8 or M/S with that soluboost additive?

markpowell

  • Posts: 2279
Re: powerburst question
« Reply #3 on: August 16, 2011, 07:33:34 pm »
Clearwater rinse is economical, PB is fine to use on wool as long as it is rinsed correctly, or so i was told on a Prochem course years ago.
Mark

Len Gribble

  • Posts: 5106
Re: powerburst question
« Reply #4 on: August 16, 2011, 08:04:35 pm »
I always forget to turn on the flow rate after p/s never had a problem or call back but I always use soft water
Always bear in mind that your own resolution to succeed is more important than any other. (Sidcup Kent)

The Carpet Cleaning Pro

  • Posts: 753
Re: powerburst question
« Reply #5 on: August 16, 2011, 08:20:33 pm »
It should be ok so long as you acid rinse. Have you considered high heat as an acidic rinse?


If you mean Prochem High Heat ... I think you will find it has a pH 9.5. So is an Alkaline not an acidic. If you meant something else then what as I am curious.

andrew christopher

  • Posts: 147

steven Banks

Re: powerburst question
« Reply #7 on: August 16, 2011, 11:40:24 pm »
It should be ok so long as you acid rinse. Have you considered high heat as an acidic rinse?


If you mean Prochem High Heat ... I think you will find it has a pH 9.5. So is an Alkaline not an acidic. If you meant something else then what as I am curious.

Sorry, i was refering to Chemspec liquid high heat  ;) which is a Ph 3 or 4 iirc ?
It's a good acidic rinse.

Simon Gerrard

  • Posts: 4405
Re: powerburst question
« Reply #8 on: August 17, 2011, 06:01:25 pm »
We've been using Powerburst on wool carpets for years.
http://www.prochem.co.uk/safety%20data%20sheets/sdss789.pdf
Prochem just say to rinse on wool carpets.
Powerburst is easily the best pre-spray on the market , bar none, imo.

Simon

Helen

Re: powerburst question
« Reply #9 on: August 17, 2011, 06:03:19 pm »
We've been using Powerburst on wool carpets for years.
http://www.prochem.co.uk/safety%20data%20sheets/sdss789.pdf
Prochem just say to rinse on wool carpets.
Powerburst is easily the best pre-spray on the market , bar none, imo.

Simon

Where do you get this "none" from if it is the only thing better than powerburst then ;D


Helen

Re: powerburst question
« Reply #11 on: August 17, 2011, 08:18:04 pm »


Helen

Re: powerburst question
« Reply #13 on: August 17, 2011, 09:29:03 pm »

garry22

Re: powerburst question
« Reply #14 on: August 20, 2011, 10:18:53 am »
Wow!

I used it for the first time yesterday.

I had done a quote last week where the potential client said "Give us an honest opinion. Are these carpets worth cleaning or should we replace them?"

These were offices adjoining a factory, with loads of oil being walked through on to them. I told them that about a third could be saved but I did not think the rest could. They asked if I could try a few patches anyway.

During the week I was talking to Jason Hedges (Dirtbusters, Norwich - NOT the E bay one) and he suggested Powerburst (thanks Jason). He was as enthusiastic about it as Simon was above.

I did the test patches yesterday and was astounded. This black oily carpet now has a 4sq M clean, light blue patch in the middle!

The MD walked in as I was finishing. He wants a price for the whole lot by Monday morning and the job completed before September 5th.

OK, it is potent stuff and you have to be a bit careful but it is well worth trying it. It's performance amazed me yesterday.

Warren Aldridge

  • Posts: 260
Re: powerburst question
« Reply #15 on: August 20, 2011, 10:24:22 am »
I standardize on powerburst.

I must say though if powerburst doesnt get a good result try a strong mix of Prochem traffic clean. Its not very economical but it is great and when mixed strong is in my opinion better than PB

Linds Russell

  • Posts: 302
Re: powerburst question
« Reply #16 on: August 20, 2011, 10:50:54 am »
We had Powerburst not work to expectation on an office carpet, so we blasted it with Enzall then extracted again. What a difference!

Always a good idea to carry Enzall.
Linds

Bob McWilliam

  • Posts: 19
Re: powerburst question
« Reply #17 on: August 20, 2011, 12:45:31 pm »
We've been using Powerburst on wool carpets for years.
http://www.prochem.co.uk/safety%20data%20sheets/sdss789.pdf
Prochem just say to rinse on wool carpets.
Powerburst is easily the best pre-spray on the market , bar none, imo.

Simon
Sounds like a very good pre spray and I am always open to trying something new. I followed the link to the data sheet, I know they have to keep themselves in the clear, but wearing a half mask worries me a bit. Is this something you do?

Simon Gerrard

  • Posts: 4405
Re: powerburst question
« Reply #18 on: August 20, 2011, 03:34:38 pm »
We've used pb for years and never even thought about wearing a mask.

Bob McWilliam

  • Posts: 19
Re: powerburst question
« Reply #19 on: August 20, 2011, 06:39:09 pm »
Thanks for that, I'll give some a try.