[erithwc]

bumper on my 450 gpd i get lots of water coming out the waste i don't think you can do anything about it what i did was got a measuring jug and timed to see how long it look to produce a one ltr of pure water

[bumper]

Might buy a 11Ltr DI vessels later, do you just connect to water supply and a pipe to your container,and do you get connectors with the di,.
   thanks bumper

[marcus hopkins]

You will get water from the pure and waste pipes while producing water. The ratio is normally 2:1 with the waste water being the greater. when the pure water outlet is closed water will still come from the waste pipe. To resolve this contact varitech or Anchor cleaning supplies for a waste shutoff valve. Your problem will be solved. Regarding the TDS from the RO it may not drop below 002 or 001 as there are many factors that effect water quality, TDS from tap, Water pressure through membranes (ro's do not work very effectively if the water pressure is below 60psi). Poor water pressure can be counteracted by adding an inline tap on the waste water and turning the waste flow down creating more pressure through the membranes and less waste water, but this does need playing with to get the best results. Hope this helps.

[bumper]

just  checked about a gallon in 1 hour,thanks for your help guys il start posting if i can help others.

[♠Winp®oClean♠]

Might buy a 11Ltr DI vessels later, do you just connect to water supply and a pipe to your container,and do you get connectors with the di,.
   thanks bumper

Yes you do. Most suppliers DI's come with hozelock male fittings already on BUT just check first.

[dd]

IMO 300gpd units are very good but are better on a static set-up as they produce pure water slowly.

When producing pure water you should still get aroung 50-60% waste, so you will always have water going down the drain. On flush mode the waste ratio is higher (you still get some pure product water).

If you have any leaks just push the pipe in firmly to the connector as it may just be a bit loose.

You need around 50psi minimum for the RO to work well, but if you want to speed production up you would need to take it higher.

[dd]

You will get water from the pure and waste pipes while producing water. The ratio is normally 2:1 with the waste water being the greater. when the pure water outlet is closed water will still come from the waste pipe. To resolve this contact varitech or Anchor cleaning supplies for a waste shutoff valve. Your problem will be solved. Regarding the TDS from the RO it may not drop below 002 or 001 as there are many factors that effect water quality, TDS from tap, Water pressure through membranes (ro's do not work very effectively if the water pressure is below 60psi). Poor water pressure can be counteracted by adding an inline tap on the waste water and turning the waste flow down creating more pressure through the membranes and less waste water, but this does need playing with to get the best results. Hope this helps.

If you shut the waste water off you will raise the tds of the product water and the membranes will wear out more quickly.

[bumper]

Next question flo rate  is how fast water comes out of brush what is autocal.plus calibration,now im a pro im going to try upload a photo of myself

[bumper]

 

[luther1]

Is that your dad holding you Bumper?

[paul saunders]

MY EYES MY EYES. 

[P @ F]

Bumper , are you on a water meter ?

 Rich

[Tom White]

MY EYES MY EYES. 

[bumper]

No water meter,about 2 hours till fill 25ll container,water now 0000 ,all i need to know now is water flow what number to put it  on and set up Autocal and calibration.
 thanks bumper

[G Griffin]

 

You`ve let yourself go, Bumper. What`s happened to you since your last avatar? Is it the stress of wfp?
And turn the water off, there`s a big puddle behind you.

[Sean Dyer]

bumper is a fish omg

[bumper]

on my 3rd 25L container, me thinks time for bed dreaming of the next big fish to catch,have ago of cleaning my windows with wfp with tap water first.
    thanks bumper

[dazmond]

2 hours to fill 1 25L BARREL?

it take me about 50 mins to fill 10 barrels DI only.

your tds is quite high for just DI only BUT it will be a lot less hassle bumper.

just follow instuctions you got with the trolley regarding calibration.

by the way i also have a 50L FREEDOM TROLLEY.great bit if kit.i have flo rate on 60 most of the time.

get 30m of streamline 5 extension hose(available from pure freedom).saves you moving the trolley as much.


best wishes


dazmond

[bumper]

ok guys got  mi Reverse Osmosis System sorted  just 3 things if anyone can help.
1/ flow rate/is thats the ammount of water comming out of pole  
2/how to you stop the flow of water from your pole
3/what is Autocal,/press and hold to go into calibration press down to autocal
  Thanks for all your help bumper
 

[bumper]

My tds is now 0000       25L barrel fills IN 1 half hours now   
   thanks bumper