Handtool Filter

« **on:** February 02, 2011, 01:18:58 pm »

Im getting debris blocking up my handtool. It looks like bits of dirt but because there is no filter for the handtool I am having problems. I have tried flushing the system for some time but bits are still appearing, so Im wondering if there's a filter available for this. I have a hide a hose and it would be possible to fit a filter between two lengths of hose but do they exist? Thanks

« **Reply #1 on:** February 02, 2011, 01:21:30 pm »

fit one of these

http://www.worldofclean.co.uk/index.php?productID=334

« **Reply #2 on:** February 02, 2011, 01:24:40 pm »

Great thanks, but where does it fit, and will it fit a hide a hose do you know?

« **Reply #3 on:** February 02, 2011, 01:39:07 pm »

It fits on a 1/4" pressure hose anywhere.

« **Reply #4 on:** February 02, 2011, 01:44:22 pm »

and descale your machine.

« **Reply #5 on:** February 02, 2011, 01:48:48 pm »

Ok, yes I was trying to de-scale it, running citric acid through it, which could be the cause of it? At least its doing the job.

« **Reply #6 on:** February 02, 2011, 01:53:09 pm »

I was waiting or Matt to get one from the states ,in the meantime placed order with solution and included one . Then Matt phoned to say he had mine ready to ship. Now have two !
But get this- solution £17
Matt £ 5
Someones havng a laugh , exactly the same thing.
Mike

« **Reply #7 on:** February 02, 2011, 02:09:11 pm »

Is it just for the filter or connections too? I dont want a permanent inline one, just one I can connect when using the hand tool.

« **Reply #8 on:** February 02, 2011, 02:22:06 pm »

I would fit this on your solution line behind the connector that fits onto you machine and just leave it on, then it will protect any tool you use wand or handtool.

« **Reply #9 on:** February 02, 2011, 02:29:48 pm »

Yes its just that I have a filter on my wonderwand already so I dont want it blocking up and affecting the flow, is it easy to take off and clean?

« **Reply #10 on:** February 02, 2011, 02:34:10 pm »

yes it is easy to remove and clean, and you do want it to block becuase that means its doing its job which is to filter out any crap, if it did'nt block then you would have no need for it. When its clean it will have no effect on your flow rate

« **Reply #11 on:** February 02, 2011, 04:28:17 pm »

Monty it seems I have both a 3/8'' connector and a 1/2'' connector thread available so will it still fit?

« **Reply #12 on:** February 02, 2011, 04:40:43 pm »

Quote from: Mike Halliday on February 02, 2011, 01:21:30 pm

fit one of these

http://www.worldofclean.co.uk/index.php?productID=334

if your machine outlet is femail your ok as it all fits ok - but if like me you have male outlet connector's from the machine you need to take the BB out as these have a one way flow - i fitted mine and fired up nothing come out !!!!!
the strainer part has a small ball bearing in it to stop flow one way.
easy fix just uncrew the mesh and take BB and spring out , refit - bingo works .... :

Adam Fearnley

Handtool Filter

Mike Halliday

Re: Handtool Filter

Adam Fearnley

Re: Handtool Filter

The Carpet Cleaning Pro

Re: Handtool Filter

Dennis

Re: Handtool Filter

Adam Fearnley

Re: Handtool Filter

Mike_Roper

Re: Handtool Filter

Adam Fearnley

Re: Handtool Filter

Mike Halliday

Re: Handtool Filter

Adam Fearnley

Re: Handtool Filter

Mike Halliday

Re: Handtool Filter

Adam Fearnley

Re: Handtool Filter

jsm

Re: Handtool Filter