Interested In Advertising? | Contact Us Here
Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

murky

  • Posts: 627
Re: 300 RPM too fast for agitaion and bonneting
« Reply #20 on: February 05, 2011, 07:38:12 pm »
Marc.

Is that why your tag line says 'what comes round goes around'.

Murky

M.Acorn

  • Posts: 7223
Re: 300 RPM too fast for agitaion and bonneting
« Reply #21 on: February 05, 2011, 08:26:53 pm »
Ha ha yeah
What goes around comes around

The Carpet Cleaning Pro

  • Posts: 753
Re: 300 RPM too fast for agitaion and bonneting
« Reply #22 on: February 05, 2011, 09:19:52 pm »
Just picked this up of flea bay. What a bargain. Any one got a solution tank for it for sale?

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=160537751167&ssPageName=STRK:MEWNX:IT

jasonl

  • Posts: 3183
Re: 300 RPM too fast for agitaion and bonneting
« Reply #23 on: February 06, 2011, 12:30:03 pm »
Why do you want a tank for it ? Just prespray and away you go.

Think of all the hassle of a tank , imagine if you use half a tank on a job , you have to somehow empty the tank , or lift it into the van sloshing water everywhere. Not practical  really , trust me I have been there.
I clean carpets
I dry Buildings

Steve. Taylor

  • Posts: 1036
Re: 300 RPM too fast for agitaion and bonneting
« Reply #24 on: February 06, 2011, 12:42:25 pm »
Following on from jason's post i would normally only use the tank on hard floors

How to make a simple tank post LOL

Use a 5 litre clear plastic container drill a small hole in the lid fit a small brass gas tap with a length of wind screen washer hose.

Cut half the bottom of the container out with a sharp stanley knife sand paper rough edges

Make up a bracket and strap to machine. All done for £6

Wait for it you can't do that it is not professional ::) you got to spend a £100 on a tank that drips ;D
Steve T       All the gear but no idea!
www.leatherrepairsouthampton.co.uk

The Carpet Cleaning Pro

  • Posts: 753
Re: 300 RPM too fast for agitaion and bonneting
« Reply #25 on: February 06, 2011, 03:05:36 pm »
What would you reccommend as for the best type of pads to use for bonnetting... Lambs wool??? Where is best place to buy from?

Steve. Taylor

  • Posts: 1036
Re: 300 RPM too fast for agitaion and bonneting
« Reply #26 on: February 06, 2011, 03:46:13 pm »
Monty i have just bought 10 of these se johnson pads only used 1 as yet but nice pad good price too

http://cgi.ebay.co.uk/Carpet-Cleaning-low-moisture-pads-fit-17inch-machine-/250768029146?pt=LH_DefaultDomain_3&hash=item3a62f075da
Steve T       All the gear but no idea!
www.leatherrepairsouthampton.co.uk