[Wc Solutions]

have high tds and di only for now, long story.

tds is about 200 and have a 11ltr di canister, always used tulsion resin from daqua and went straight to 000tds within secs.

ran out of resin and daqua was out of stock, so i got it from purefreedom.

just filled canister as normal, plugged it in (making sure in & out were correct).

water coming out at around 40!!

any help guys???

[Wc Solutions]

one thing ive just noticed: the resin is normally all soggy and thick after use - just had a look in the canister and it seems to still be fairly dry still

[mci services]

check the riser is seated tightly into the cap sometimes the water can get through

[darren clarke]

check that it is going in and out the right way and that the neck inside is all the way in

[Wc Solutions]

checked both and now im getting no water coming out

[Wc Solutions]

just taken riser out and taken it apart - put it back together all is seems to be good again.

the only thing i didnt do that i normally do is add a little water to the resin to put the riser in - i just forced it down straight through the dry resin - is that what ive done wrong??? riser not in all the way??

[mci services]

just taken riser out and taken it apart - put it back together all is seems to be good again.

the only thing i didnt do that i normally do is add a little water to the resin to put the riser in - i just forced it down straight through the dry resin - is that what ive done wrong??? riser not in all the way??

just a guess but yes

[vision tech]

I always put riser in to dry resin ,never been a problem.

[Wc Solutions]

I always put riser in to dry resin ,never been a problem.

and i have never had a problem before - until yesterday. strange

[darren clarke]

if the riiser is in right it is a problem with the resin, that is the only thing it can be