[Sir Squeaky]

Does anyone recommend a good tap connector for my RO feed?

I had one from RO Man and after 3 weeks it's split, so water going everywhere.

What does everyone else use?

[leights]

new hose lock alloy from b and q bout 6 quid, bees knees

[Sir Squeaky]

new hose lock alloy from b and q bout 6 quid, bees knees

Didn't think hoselok did anything 1/4 inch 

[Sir Squeaky]

Well thanks for all the help...

Every person on here who makes pure water uses a connection to a tap, and only one person is good enough to even reply. :

[mci services]

Well thanks for all the help...

Every person on here who makes pure water uses a connection to a tap, and only one person is good enough to even reply. :

squeaky sorry mate but I do not use an RO as I am di only and I haven't a clue what you are asking. if you were a bit more specific I may be able to help

[Sir Squeaky]

That's alright mate, wasn't aiming at any one person!

This thing...

Want to know what better one others use?

[wayne 77]

sorry cant help my ro uses push fit fitting

[andyM]

No sorry can't help either mines a 3/4" threaded tap connection with a 1/4" pushfit RO hose connection

[andyM]

Im not sure if the one at the bottom of the page on this link will be any good?
http://www.gardinerpolesystems.co.uk/acatalog/Standard_Plastic_End_Stops_etc.html
Its a Hoselock fitting with a 6mm barbed end.
Might be worth giving Gardiners a ring to see if it will do the job for you

[Steven Shoreditch]

Where's the Fairy?

[mci services]

that last suggestion from ajm is what I would do but as I said I am di only so no idea really, by the way your tiles look like the grouting needs cleaning

[Sir Squeaky]

that last suggestion from ajm is what I would do but as I said I am di only so no idea really, by the way your tiles look like the grouting needs cleaning

Doubt it mate, they're brand new!

Im not sure if the one at the bottom of the page on this link will be any good?
http://www.gardinerpolesystems.co.uk/acatalog/Standard_Plastic_End_Stops_etc.html
Its a Hoselock fitting with a 6mm barbed end.
Might be worth giving Gardiners a ring to see if it will do the job for you

No, that's bigger than the red output hose. Thanks anyway.

Maybe I'll phone Alex...

[paul saunders]

Rodger, you need one of these,
http://www.remotebasket.com/basket.php?shopId=1438&deliveryCountry=225&deliveryCountryCount=1
then a short length of hose with female hoselock connectors on each end.

Or this one if you can't wait for him to re-open his shop.
http://www.windowcleaningwarehouse.co.uk/shop/john-guest-fittings/ro-to-male-hoselock.html

[Sir Squeaky]

Or this one if you can't wait for him to re-open his shop.
http://www.windowcleaningwarehouse.co.uk/shop/john-guest-fittings/ro-to-male-hoselock.html

Ah, that'll do it! No rubber to split!

Thanks mate. Spot on.

[Sir Squeaky]

These two will do the same job won't they? Half the price that's all...

http://www.ro-man.com/shop/product_info.php?cPath=286_48_75_65_40&products_id=52

with...

http://www.ro-man.com/shop/product_info.php?cPath=286_48_75_65_40&products_id=201

[elite mike]

this is what you need rog

http://www.ro-man.com/shop/product_info.php?cPath=40&products_id=57

just put on pipe under the sink and turn the screw till it cuts in

simple and cheap, tosh will show you

[elite mike]

ps there is even a video guide to show you on there

[Sir Squeaky]

Thanks Mike, but that's nothing to do with it!

I've got a perfectly good hoselock connection.
I'm talking about hoselock to quarter inch, which you'd still need anyway!

[elite mike]

sorry rog ime not with you

[tomy jackson]

john gest fitings