[Ste M]

Hello ive got a two man pure freedom, only ever used one pump, (the system was second hand when i bought it) used the other pump today and its not got as much pressure as the first pump when used on the same setting, i usually have my variflow on 6 or above and thats just about ok i find. Just wondering if the pump may be on its way out or could it be something else?

ste

[daz1977]

what was the psi of the old pump 100 or 60  and what is the psi of the new pump

[Ste M]

what was the psi of the old pump 100 or 60  and what is the psi of the new pump

both are existing pumps, not sure of the psi i just assumed they are 100

[R W C™]

Have you got a digital controller

[Ste M]

Have you got a digital controller

no it has two dial ones

[R W C™]

Have a look under the pumps and see what pressre switch is on it maybe its been replaced before but with a smaller psi....

[Peter Fogwill]

Hello ive got a two man pure freedom, only ever used one pump, (the system was second hand when i bought it) used the other pump today and its not got as much pressure as the first pump when used on the same setting, i usually have my variflow on 6 or above and thats just about ok i find. Just wondering if the pump may be on its way out or could it be something else?

ste

Are you now using both pumps at once, or are you using one at a time?

Peter

[Ste M]

One at a time usually but due to start usin both very soon

[Peter Fogwill]

The reason I asked is I have seen two similar pumps run from the same battery at the same time, and one producing less than the other, and though this might have been your problem.  When either one was off, the other produced what it should.

Peter

[Ste M]

finally had chance to have a look at the pumps, they are both 100psi. has anyone any ideas what could cause this?