wand jets

« **on:** April 30, 2010, 09:31:23 pm »

Need to replace the jets on one of my wands was looking at the stainless ones now stainless being a lot harder than brass would they last longer or be better in any way any one used them. or am i just talking crap

« **Reply #1 on:** April 30, 2010, 09:38:00 pm »

yep they will last longer I always go for SS if possible

« **Reply #2 on:** April 30, 2010, 10:29:13 pm »

Thanks mike had a gut felling but never used stainless will pay the little extra then cheers.

« **Reply #3 on:** May 01, 2010, 12:51:01 am »

stainless steel jets will more than pay for themselves as they will outlast brass ones by a mile.

« **Reply #4 on:** May 01, 2010, 01:02:35 am »

Any ideas where to buy them?

All the best,
Jason.

« **Reply #5 on:** May 01, 2010, 07:30:39 am »

Hydramaster

« **Reply #6 on:** October 20, 2010, 12:11:48 am »

Hi all
Have an old 10" single jet wand that I want to bring back into service, can anyone recommend a jet size?

« **Reply #7 on:** October 20, 2010, 01:30:23 am »

[============== this big =================]

« **Reply #8 on:** October 20, 2010, 06:30:59 am »

11006 maybe......usually it depends on the hieght of the jet above the carpet

« **Reply #9 on:** October 22, 2010, 10:23:20 pm »

Thanks Mike...

Was thinking maybe 110 04 - 06. Jet height 5" above carpet. Removed the original jet years ago for something else I was doing at the time.

Many thanks for the info.

Steve. Taylor

wand jets

Mike Halliday

Re: wand jets

Steve. Taylor

Re: wand jets

richie

Re: wand jets

Jason Hedges

Re: wand jets

mitch2810

Re: wand jets

Maurice Brown

Re: wand jets

Jim_77

Re: wand jets

Mike Halliday

Re: wand jets

Maurice Brown

Re: wand jets