Interested In Advertising? | Contact Us Here
Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

CleanClear

  • Posts: 14600
Re: Spruce / Anybody , would this work ? VIDEO
« Reply #40 on: January 17, 2018, 08:50:25 pm »

I'm still a bit confused by the battery reading of 13.2v. My leisure battery has never shown more than 12.9v at rest.


This battery shows this reading tonight, i took it off charge on Sunday. I've never had a battery show under 13v when charged (unless it was knackered)

 

Mind you, i do have a special charger for it, doesn't show when its on float or anything. Its 25 years old + , from Halfords. Not sure if you can get them anymore ?


*Status*--------Currently Online---------

P @ F

  • Posts: 6319
Re: Spruce / Anybody , would this work ? VIDEO
« Reply #41 on: January 17, 2018, 08:51:31 pm »
Well with any luck i have just done my last rainy/dark voltage check , which was a good result again !

I have only driven 10 miles tops today , started with a full battery , the pump/drill  has taken  out 11 amps , which is about 3 hours non stop pumping , or at least 4 hours on the job with standard houses , i parked the van up at 4 so has been a 4.5 hour rest .

Solar in not known as the meters played up again , but it was pants weather for sun , this could be the answer i have been looking for , so i am fully charged and still have a 10 mile journey to pull from the alternator in the morning before i start work again .

As long as the battery holds up i am on a winner here .
I'm so lazy I'm getting tired of it !

P @ F

  • Posts: 6319
Re: Spruce / Anybody , would this work ? VIDEO
« Reply #42 on: January 17, 2018, 09:07:22 pm »
I do see what you are saying Cleanclear  with regard to the solar , if i knew results from a MF battery with feed from my alternator would be so good i might not have bothered , BUT , many w/c's will be parked all day doing no milage at all and cleaning the Shard before they go home  , no  SCR /  B2B will help in this instance unless they idle the van for a bit .
I like to mess about with stuff and all the gear i have gotten has only just topped £300 , a small price to pay to be self sufficient ! 
I'm so lazy I'm getting tired of it !

P @ F

  • Posts: 6319
Re: Spruce / Anybody , would this work ? VIDEO
« Reply #43 on: January 17, 2018, 09:11:13 pm »
Oh and your old charger , what a bit of class that is , i had exactly the same one made by Lucas , only a 4 amper but i miss it lots .

The only reason it went in the bin was the wire got so brittle it snapped of where the wire goes into the charger from underneath.
I'm so lazy I'm getting tired of it !

P @ F

  • Posts: 6319
Re: Spruce / Anybody , would this work ? VIDEO
« Reply #44 on: January 17, 2018, 09:15:37 pm »
Just noticed yours is slightly different , my red and black went in on the base , thats why yours is still alive  >:(
I'm so lazy I'm getting tired of it !

CleanClear

  • Posts: 14600
Re: Spruce / Anybody , would this work ? VIDEO
« Reply #45 on: January 17, 2018, 09:17:56 pm »
Wasn't a critiscim. Just acknowledging  that many folks are already doing this.  I've got my SVR, still not wired it in yet though!!
*Status*--------Currently Online---------

CleanClear

  • Posts: 14600
Re: Spruce / Anybody , would this work ? VIDEO
« Reply #46 on: January 17, 2018, 09:19:23 pm »
Just noticed yours is slightly different , my red and black went in on the base , thats why yours is still alive  >:(
if you had it now you'd resolder new wires on :-)
*Status*--------Currently Online---------

P @ F

  • Posts: 6319
Re: Spruce / Anybody , would this work ? VIDEO
« Reply #47 on: January 17, 2018, 09:32:22 pm »
No ..........Because i dont need a charger anymore  :-*
I'm so lazy I'm getting tired of it !