Interested In Advertising? | Contact Us Here
Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

Mist A Bit

  • Posts: 1032
veriflo frost stat with fogwash
« on: December 30, 2014, 02:43:28 pm »
thinking of converting to this so my fogwash fires up in the night so not to bother with plugging in heaters ect. does it work well with lpg heaters, and my main question is can the warmed up water be directed thro the ro and pre filters  before going into the tank, as the ro is my main consern

Elfyn

  • Posts: 495
Re: veriflo frost stat with fogwash
« Reply #1 on: December 30, 2014, 03:24:45 pm »
I always thought that the water in your tank would have already gone through the RO.
I like the idea though, heat the water overnight and keep the van warm at the same time. Don't Ionic systems do something similar?

Mist A Bit

  • Posts: 1032
Re: veriflo frost stat with fogwash
« Reply #2 on: December 30, 2014, 06:48:21 pm »
i think you miss understood me, i wouldn`t heat the water overnight it just fires the boiler up when temp falls to say 2oC and cuts out when it reaches 5oC . if i wasnt hooked up overnight to produce pure water i wanted to know if the circulated water could go through the ro to make sure it didnt freeze overnight, im looking at eliminating the need to connect to electricity

dannymack

  • Posts: 1624
Re: veriflo frost stat with fogwash
« Reply #3 on: December 30, 2014, 06:52:03 pm »
Tbh I would stick with a small Dan heater on a timer, I set mine an hour before I go out so it's all warm in the back. I use the fog wash but wouldn't like it clicking on when your dealing with gas.

Spruce

  • Posts: 8649
Re: veriflo frost stat with fogwash
« Reply #4 on: December 30, 2014, 07:28:34 pm »
i think you miss understood me, i wouldn`t heat the water overnight it just fires the boiler up when temp falls to say 2oC and cuts out when it reaches 5oC . if i wasnt hooked up overnight to produce pure water i wanted to know if the circulated water could go through the ro to make sure it didnt freeze overnight, im looking at eliminating the need to connect to electricity

According to a post by Ian a few weeks back, the froststat will kick in at 2 degrees and switch the pump on for 10 minutes. You need to run this hot water either through your hose reel and back to a connector on the tank or directly from the pump to the tank. It's designed to keep the gas boiler from being damaged by frost.

You are right, it isn't designed to heat the water in the tank as that would take much longer than 10 minutes.
Success is 1% inspiration, 98% perspiration and 2% attention to detail!

The older I get, the better I was ;)

advanced

  • Posts: 326
Re: veriflo frost stat with fogwash
« Reply #5 on: December 31, 2014, 10:19:40 am »
 I got one and it does come on but only trikles water  not enough to fire boiler up

Spruce

  • Posts: 8649
Re: veriflo frost stat with fogwash
« Reply #6 on: December 31, 2014, 11:37:01 am »
I got one and it does come on but only trikles water  not enough to fire boiler up

If you purchased one made prior to 1st Dec 2013 then it can only be used with diesel heaters.

The new ones have an adjustable speed control that can be set higher for gas users.

http://www.springltd.co/node/91

Success is 1% inspiration, 98% perspiration and 2% attention to detail!

The older I get, the better I was ;)