[Paul Simpson]

Powerflight PFX1350 perfect heat extractor only.
500 psi, twin vac, autofill fitted with float valve and external connector.
New vac fitted approx. 1 month ago, other than that never had a problem with it.
No hoses or tools included.
Used as a back up for the last 18 months with little use other than giving it an outing every so often.

Collection from East Sussex preferred or arrange own courier.
I will however be travelling to Leicester near the end of November so could drop off/meet somewhere near the M25 or M1 as long as a deposit is paid to secure.
Pic below or see a video of it taken today on the "video site"
http://www.youtube.com/watch?v=ADTDIhtNEr0&feature=feedu

£1150
contact@cleanlivingservices.co.uk

[Paul Simpson]

Near offer anyone or will have to try Ebay!

[Jamie Pearson]

Where did you source the auto fill?

[Paul Simpson]

Its a float valve (DIY store), hole drilled and hose connector fitted.

[Carl Anderson]

Powerflight PFX1350 perfect heat extractor only. 500 psi, twin vac, autofill fitted with float valve and external connector. New vac fitted approx. 1 month ago, other than that never had a problem with it. No hoses or tools included. Used as a back up for the last 18 months with little use other than giving it an outing every so often. Collection from East Sussex preferred or arrange own courier. I will however be travelling to Leicester near the end of November so could drop off/meet somewhere near the M25 or M1 as long as a deposit is paid to secure. Pic below or see a video of it taken today on the "video site" http://www.youtube.com/watch?v=ADTDIhtNEr0&feature=feedu £1150 contact@cleanlivingservices.co.uk

how about a nice round £1000? Would have to arrange courier though? Would you be willing to accept cheque?

You can contact me on 07801512559

[Paul Simpson]

Hi Carl

Re your other post - it does have an inline heater and the water is also heated from coils wrapped around the vacuum motors so in effect you have 2 heaters providing very hot water.
Your tools question is difficult to answer, depends on what tools and if you buy new or used, £200-£500 I would guess.
Would be happy with the offer and a cheque but you would have to allow full clearance of the cheque (approx. a week after receiving it) before you could arrange pickup. Not that I don't trust you...........I just don't trust anyone 
If your happy to proceed I will give you a call this evening, let me know.

Paul

[Paul Simpson]

****NOW SOLD****