Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: master cleaner on August 18, 2006, 08:20:50 pm
-
hi ive got an ibc container and it has been used for glue , most of it has been removed but not all it is the white pva kind of glue , what can i use to remove it .
thanx in advance
gary
-
You can try a steam cleaner.
A high pressure washer.
I bought a second hand IBC 1000ltr container that had a chemical in they used to put in plastic to make the plastic plyable.
I cut a hole in the top, had to anyway as my submersible pump would not fit in the normall hole. I cleaned mine out with a good degreaser and I could reach most of the inside by hand with a scrubbing brush. I just used a stiff brush on the parts I could not rech by hand.
Nel.
-
chances are its mystolene - if it is then just a steamer or pressure washer, it takes a while but should come off eventually. Q - are there any lumps in it, sometimes mystolene sets but it sets in sheets almost.
-
chances are its mystolene - if it is then just a steamer or pressure washer, it takes a while but should come off eventually. Q - are there any lumps in it, sometimes mystolene sets but it sets in sheets almost.
hi jm 123 & neil100
the bottom of the container has got a coating of glue on it i have used a pressure washer but it wont get the thick stuff off , i am thinking of getting into the tank and cleaning it ie i have cut a slit across the top to put a sub pump in and i am thinking of taking it out of its cage and trying to get inside it has anyone done this
or is there a chemical that will remove the glue
gary
-
Hi Gary,why don`t you just get another tank? ;D,Gaz
-
stop moaning and get cleaning!!!!
Gaz did you manage to get the brushes sorted out?
-
stop moaning and get cleaning!!!!
Gaz did you manage to get the brushes sorted out?
Hi jonathan,yes i did,they will be winging their way to you asap,Gaz ;)
-
good man - good service - will check the brushes out.
Ta very much