Clean It Up
UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: M.Acorn on April 15, 2013, 06:47:53 pm
-
Anybody use them ?
Was looking at this one http://www.ebay.co.uk/itm/PRO-Commercial-Ozone-Generator-10000mg-10g-Ozonizer-Air-Purifier-Sterilizer-/190787629617?_trksid=p3984.m2206&_trkparms=aid%3D222002%26algo%3DSIC.FIT%26ao%3D1%26asc%3D129%26meid%3D6984186722780095572%26pid%3D100052%26prg%3D1108%26rk%3D4%26sd%3D220805863465%26
Not sure about this - Neutralises odors and breaks down harmful chemical substances (Muff, tobacco and Animal smell, etc.)
-
Muff? They are good, but not that good.
-
I used to be great at breaking down muff, before I met the Mrs.
-
Mark if those figures are correct then that is very good value. Check it fully out first though.
-
Not really sure what I should be looking for Paul,I need something that is able to do the average size 4 bed house,to take care of smoking smells and pet smells.
There are quite a few on e bay,that one looked the most up to the job.
-
So has anyone ordered one? ???
-
They also do a more powerfull one thats a bit more pricey, but either will do the job for what you want . As long as they are genuine machines that is and not poope.
Dont forget that a karcher puzzi is a pro carpet cleaning machine ( in their marketing) :D
-
Worth a punt at that price, just ordered one. I'll let you know the verdict when it arrives.
-
Mine cost over a grand ten tears ago
-
Interesting... please let us know your thoughts!
-
Ask the cost of replacement plates and if they can be replaced. They sometimes fail and in the past I have tried to get machines fixed and it was easier to buy a new one.
-
Ash
I always find muff breakdown much harder after a kick in the balls, so I hope your Mrs does nt read this post.
Muff breakdown, I have often considered adding this to my list of services on my sites can anybody see any pitfalls?
Peter
www.carpetcleanercardiff.com (http://www.carpetcleanercardiff.com)
-
I did e mail the seller asking about replacement plates,but she didn't really know what I was talking about.
Not really up on how they work myself,anyone care to go into a bit more detail,so sort of galvanic process where a current is passed through some plates ?
I know my mate had a galvanic isolator on his barge,but the one next to where his was moored had dodgy electrics and it stripped the paint off his in under a year !!
-
I would be relucantant to buy from a Company outside the UK
-
Well its arrived!! I’ll put some pics up in a bit and feedback after the weekends trial….
-
Well its arrived!! I’ll put some pics up in a bit and feedback after the weekends trial….
I ordered my one 2 days ago... the tracking info is all in Polish ???
Hope its not a pile of rubbish!!!
-
let us know how you get on with them chaps
-
Ok ordered it on the 17th of April via eBay and received on the 25th April via Parcel Force. It was well packaged the photo’s will tell the rest. So unpacked and installed the ceramic plates as required, also removed the supplied continental plug and replaced with UK 3 pin plug. Plugged in and all is fine!!! I am comparing this to a machine I had that was 3x the size, the smell of ozone Im getting from this is massive compared to my old machine. I know that is no technical experiment but don’t have the means to test scientifically. First impressions are very pleasing… Would be interested on JK or others views on obtaining replacement plates? Manufacturer from what i can gather is www.computercars.pl I have a few friends in poland whom I will get to contact for details.
(http://i41.tinypic.com/34p1d12.jpg)
(http://i42.tinypic.com/2lsgm0p.jpg)
(http://i36.tinypic.com/161z7cy.jpg)
(http://i43.tinypic.com/b6t05e.jpg)
(http://i43.tinypic.com/zkjr7o.jpg)
(http://i40.tinypic.com/7dzb.jpg)
(http://i40.tinypic.com/145ylk.jpg)
(http://i43.tinypic.com/zkjr7o.jpg)
(http://i39.tinypic.com/25hlijn.jpg)
(http://i42.tinypic.com/2ykkke1.jpg)
(http://i39.tinypic.com/3484wpj.jpg)
-
Now wish I had ordered the bigger machine…..
-
Now wish I had ordered the bigger machine…..
Why?
-
Ash, just beacuse on this smaller machine it has a 30min timer. Which is good but I for what I use it for I like to leave it running over night. Could be a pain having to go back every 30min ::)roll
-
Surely its got a constant switch.
-
;D ;D No John no constant switch!!!!!!!! Should'nt be to hard to alter though.
-
I ordered the larger model which is this one :
http://www.ebay.co.uk/itm/190800855413?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
Still waiting for it... should be here i would imagine Tuesday, i believe this model has a timer (0 - 120 mins) and a hold function.... watch this space :D
-
Russ the uv torch you brought to the tacca event wa superb.
Russ had a plate with a slice of cucumber on it, when he switched the torch on you could see all the spoilage bacteria in the centre where it had been sliced.
Ifs the best torch ive seen and its half the size of the others that are no where near the power.
If you do anything with contamination cleaning, this is the baby you need ;)
-
Thanks for the compliment Paul! it was a real treat to see see you work on that knackered sofa... real craftsmanship! ;)
-
Damn I forgot about russ's torch.
Shaun
-
Hey Shaun. i will still honour the special TACCA price if you want one, i have 4 available
Just email me for details info@prosteamuk.com
-
Russ get some pics up of the tacca, your the new official photographer, god help Billy :D
-
Will do a bit later
-
Looks a good bit of kit.surprised they dont have the warning signs in English.
-
I checked and they give a 24 month door to door warranty... will try and write up a review on it when it arrives