Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: bobplum on January 16, 2012, 04:25:46 pm

Title: aqua adapter on a ...........
Post by: bobplum on January 16, 2012, 04:25:46 pm

Harris pole,does any one know if this is feasible
cheers
bob

Title: Re: aqua adapter on a ...........
Post by: Ian Sheppard on January 16, 2012, 04:49:23 pm

As far as I know it should fit any Pole.

Title: Re: aqua adapter on a ...........
Post by: bobplum on January 16, 2012, 05:39:56 pm

I am assuming you would have to cut of the metal threaded section on the tip of the pole and fit to the pole?

Title: Re: aqua adapter on a ...........
Post by: Aqua-dapter on January 16, 2012, 05:46:06 pm

Hi Bob,

I've seen them on a few Harris poles.  With the new Mk3 you would need to cut off the metal end and glue in a new 'hose through' type end screw.  The Mk3 has an female screw thread for standard 'German Thread' tips.

Not sure whether pulling on the hose would cause the harris clamps to wear more quickly(?)

Paul

Title: Re: aqua adapter on a ...........
Post by: bobplum on January 16, 2012, 05:59:40 pm

Quote from: Aqua-dapter on January 16, 2012, 05:46:06 pm

Hi Bob,

I've seen them on a few Harris poles.  With the new Mk3 you would need to cut off the metal end and glue in a new 'hose through' type end screw.  The Mk3 has an female screw thread for standard 'German Thread' tips.

Not sure whether pulling on the hose would cause the harris clamps to wear more quickly(?)

Paul

do you do the hose thru,if yes how much would the aqua adapter and hose thru cost,in total as for the clamps i can live with that for a while
cheers bob

Title: Re: aqua adapter on a ...........
Post by: bobplum on January 16, 2012, 06:17:17 pm

Paul,have sent you an email.
cheers bOB

Title: Re: aqua adapter on a ...........
Post by: Aqua-dapter on January 16, 2012, 06:53:50 pm

Hi Bob,

Thanks, will check this eve.

We do a hose through end screw, on the website it's called 'Aluminium Pole End Screw Type1'.

I'm not sure what the ID of the top section of a harris pole is?  The shaft on the end screw is approx 19mm diameter.

This is supplied if you choose 'Quick-Release Clamp' for pole connection, which will then give you the total price.

Paul