Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: lozsing on September 17, 2011, 06:42:35 pm
-
Have just used tulson MB115 and found it not lasting long at all ,would not use it again . Can anyone recommend any other. thanks
-
I had purolite, which apparently is the worst resin, so I got tulsion 115, but it also doesn't seem to be lasting long, I did read somewhere that certain types of water need different resin.
Dowex is supposed to be good that's what I am going for next.
-
.
-
dowex every time.
-
Always Dowex last for ages 8)
-
Dowex MB50 I have used this for the last 8 or 9 years
-
I have been buying tulsion mb 115 by the half bags and I to feel its not lasting a week or two. It start climbing the first week MY R O is always 19 TBS. I am just thinking if these half bags are not recycled OR EVEN TULSION IN THE FIRST PLACE.
-
I have also found that tulson MB115 is not lasting as long as it used too. I asked my mate another WC round the corner and he said the same...
I wonder if it is just coincedence or if they are not producing the same quality.
-
if i remember right doug from daqua was saying that there was a bad batch being sold of cheaply to supplier,and this was not so long ago.
hmm i wonder
-
.
-
mb-115 from daqua.
best customer service u will find.
he phoned me for being an idiot and ordering wrong things ;D ;D
thats customer service for you
-
Just refilled my 11l itre Di unit with Tulsion Mb115 and checked output at 0TDS.
Checked it after I've filled my 400 litre tank and it's reading 001TDS.
Leaky riser in the Di unit?
-
Just refilled my 11l itre Di unit with Tulsion Mb115 and checked output at 0TDS.
Checked it after I've filled my 400 litre tank and it's reading 001TDS.
Leaky riser in the Di unit?
How fast are you flowing water through the vessel?
You should really fill tank with tap water & pump though the DI on van for the best resin economy.
Resin volume Vs flow rate are two very important factors here.
-
In my 6 years ive used these in this order .
Purolite ....ok
dowex ......great
alex g .......undecided , brand not known !
tulsion 111.....best by far
But as Winpro says flow is the key factor for the life of resin , anybody that knows of me or my older posts will know that i have done a lot of messing around in this department !
Rich
-
i used purolite for years, until tulsion came along, there is no doubts about it, tulsion last at least 5 months longer,
-
Sorry to be thick, but when say 'flow' do you mean run the water thru slower or quicker or what...
-
Just refilled my 11l itre Di unit with Tulsion Mb115 and checked output at 0TDS.
Checked it after I've filled my 400 litre tank and it's reading 001TDS.
Leaky riser in the Di unit?
How fast are you flowing water through the vessel?
You should really fill tank with tap water & pump though the DI on van for the best resin economy.
Slow gravity feed through the static tank on this occasion.
Faster fill through tap last time.
Result: The Same.
Resin volume Vs flow rate are two very important factors here.
-
run the water through the tap to DI slower.youll make the most of the resin then.common sense really.
-
run the water through the tap to DI slower.youll make the most of the resin then.common sense really.
That's what I'm doing.
Incoming tds was only 35 and was first attempt at rainwater harvesting as my Aquifer is drained.
-
tulsion 115 last a lot longer than 111. Does depend where you are.
-
Mr industry , tell me more , have you done both ?
Tap tds , ro, di , flow rate , give me the low down , if you have the time that is !
Im always willing to hear other peoples findings ......some say i spend too much time in the shed , others say i lay under the van too much , all i know is i am the STIG of water treatment !!!!!! ;D
Rich
-
others say i lay under the van too much.
Rich
Is that what you call your missus? :o
-
Sorry to be thick, but when say 'flow' do you mean run the water thru slower or quicker or what...
Slower the better.
I fill may tank with tap water & this gets pumped through 2 x 11Ltr DI vessels on the van. I'm DI only with tap water being 80ppm.
-
Lee , mate if you could have seen her 2 weeks ago you yourself would have called her a bus !
Just had a little man , noisey but cool , at last an heir to the throne !
Rich
-
Lee , mate if you could have seen her 2 weeks ago you yourself would have called her a bus !
Just had a little man , noisey but cool , at last an heir to the throne !
Rich
Congratulation rich! We are expecting our second in feb. Sleepless nights all over again! >:(