This is an advertisement
Interested In Advertising? | Contact Us Here

Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

lcwalker

  • Posts: 412
Advice needed please
« on: January 07, 2010, 07:48:27 pm »
Hi i have quoted for a job on a barn conversion and got it but theres a few windows i need to use my pole for i have a unger pole which is long enough but i dont have a swivel squeegee would this be suitable for my needs thanks in advance.


http://www.windowcleancentre.co.uk/productdetails.aspx?ProductID=31&SectionID=32

lcwalker

  • Posts: 412
Re: Advice needed please
« Reply #1 on: January 07, 2010, 07:51:24 pm »
Also which one would be best the straight or the 30º thanks.

Gav Camm lammy 283

  • Posts: 7520
Re: Advice needed please
« Reply #2 on: January 07, 2010, 08:32:37 pm »
yeah not a bad squeegee
LET YOUR PANES BE MY PLEASURE

"If CALSBERG did WINDOW CLEANING
 it would be C.C.C  Probably the best WINDOW CLEANERS IN THE WORLD ..........."

lcwalker

  • Posts: 412
Re: Advice needed please
« Reply #3 on: January 07, 2010, 08:49:33 pm »
Is it ideal for pole work?

Re: Advice needed please
« Reply #4 on: January 07, 2010, 08:52:13 pm »
The 30º one ... ideal for higher pole work. The 0º is better for shop windows etc where you don't need to go too high.

Nathanael Jones

  • Posts: 5596
Re: Advice needed please
« Reply #5 on: January 07, 2010, 08:57:38 pm »
A wagtail would be better. :)

lcwalker

  • Posts: 412
Re: Advice needed please
« Reply #6 on: January 07, 2010, 09:35:27 pm »
A wagtail would be better. :)
Wheres the best place to get one a link would be very helpfull thanks.

DaveG

  • Posts: 6351
You can't polish a turd

wizard

Re: Advice needed please
« Reply #8 on: January 07, 2010, 10:07:14 pm »
The 0 degree is for when you are working over say a flat roof and the angle you need is in the pole.that meens you are standing away fron the glass. If you a crank angle at the top of your pole you can tip the crank say to 50 degrees and place the squeegee at rigt angle ti our pole length and work across the glass left to right.If you work direct below your window then the 30 degrees will be fine across or just down strokes.

lcwalker

  • Posts: 412
Re: Advice needed please
« Reply #9 on: January 07, 2010, 10:26:30 pm »
Ive just ordered a Wagtail Whirlwind i watched a youtube video and it looked brillant i hope it's as good as it looks thanks for all your help.