[Ricky M]

Carpets 400-600 upholstery 200-300

cfr at the min

[Joe H]

Carpets 400
Upholstery 200 ish with the CFR

[Shaun_Ashmore]

What size jet do you use Joe?

Shaun

[Stu.Clem]

500 - 600 minging or deeper pile carpets

Average 400 - 500 on carpets with standard 2 jet wand medium to high soil

300 carpets light clean quick one pass wanding

350 - 400 with 3" & 5"cfr handtools mostly no.2 65 jet with 1 or 2 slots open. More holes open = slight decrease in vac at fabric so more solution contact time = more aggressive cleaning and less arm ache in my experience tho then wise to do dry passes.

500 with 7.5" single jet  cfr on stairs.

Using these psi' happily acheive sensible water useage ie 400 litres easy does a long day cleaning - with very acceptable drying times.

All the best

Stu

[Joe H]

What size jet do you use Joe?
Shaun

Whatever the standard JK pushes out on the wand he supplies with the Prowler - I think it may be 2x1.5
Dont know what it is on the CFR and the head is in the van - too cold to go and look. :

[Shaun_Ashmore]

Stuart you sound like a Prowler advert

Did I leave you enough money in your safe when I robbed your house ? didn't want you starving

Shaun

[Stu.Clem]

I love prowlers me!!


My main safe is just a visible decoy to divert you vagabonds from my 2 covert cash stuffed ones... 

Stu

ps cant recall mentioning a prowler in that particular post  :

[Shaun_Ashmore]

Caught you out 

Shaun

[paul moss]

Joe, manufacturers standard wand jets are a total of 6 so it will be 2 x 03 on your wand. ( bet you go out to look now  )

Some truckmounters with 45 blowers and above will jet up to 9 escpecially if they are wanding with 4 or 6 jets as this will give more flow/flush which will aid suction therefore leaving the carpet drier.

[Stu.Clem]

nice1 cyril  

think standard jk wand  has 2 x 015 jets

Stu

pps Proper minging EOT  student house for me in morning just had more heavy snow got about 8 - 10" of the white stuff  standing on table top in back garden - luckily job is in town centre only 3 or 4 miles of main roads....

[paul moss]

If you guys are extracting with 2x 015 jets, then i hope your pre rince work is good.

[Shaun_Ashmore]

My Ti wand has 6 x 015 = 0.9 but I think my single jet wand flushes better which has 1 x 06 but that's to do with flow but the drying time isn't as good.

Shaun

[paul moss]

Shaun that because your single jet wand is 1 1/2 tube and the ti is 2 inch  :

[Shaun_Ashmore]

True but the steam from the jet bellows out.

Shaun

[paul moss]

What !! they haven't converted you to cold water cleaning yet?

[Stu.Clem]

Theres no need for you to have to hope my pre rinse work is good mate as I ALWAYS ensure that it is... 

Also when extracting at above 400 ish psi there is usually a good surplus of rinse solution dotting about so no worries there either...

Reassuringly confident

Stella Stu

I love prowlers me!!!!! 

[Shaun_Ashmore]

This time of year I think every one is cleaning with the stuff!

Do you ever regret not keeping up with the fast track pricing and quoting? last time we spoke about it you found that you had reduced some of your prices but with out knowing??

Shaun

[Shaun_Ashmore]

Prowlers usually get shot.

Shaun

[paul moss]

Stu change the jets to 03 and drop the psi to 250 and you will get a better clean.

Shaun, ive upt the evo to 10, put 02s on the ends with a wider angle for the edges , it gives it extra hit.

[Shaun_Ashmore]

Good for the skirting boards and black edges.

Shaun