[Visual Architect]

Hi all

What is the best process of cleaning the windows with WFP.

Keep seeing different ways as driving around by other contractors,and then when i complete a clean going back to the first windows to see if there are free of marks.

After the windows have been cleaned with the brush.

Rinse with the brush still on the window working side to side down the window

Rinse by taking the brush of the window and the pencil jets letting the water run free down the windows

all comments welcome

VA

[Mr T]

Most problems come from water quality. Make sure your water tds is right  and your halfway there

[Visual Architect]

Mr T

thanks for the reply,what process do you use,check the tds every time i fill up always 0

Starting to doubt myself on every clean,just need another persons advice

cheers

VA

[Window Washers]

I would say water quality is first port of call 000 then you cannot blame the water, if you have only one tds meter I would get another as these can and will go wrong if you check with one it is worng your problem could be there.

Second....check first and post back....

[daz1977]

this might sound silly, but when i first started using wfp and trad, i would dirt a window at home with dirt, coke, dried washing up liquid, any thing that would make a window look dirt, then i just practise cleaing it till i got a method i was happy with

[ccmids]

keep tds 000 start at top , then work across the lwr ones always do the sills.

[Visual Architect]

Thanks for all the advice,but do you rinse off with the brush on the window working from the top of the window and working down to the bottom

Or pull the brush off the window about 2 inchs and rinse that way again top to bottom

VA

[daz1977]

a lot do the seconf option off the window as this creats like a waterfall effect and the dirt is meant to run off,  just practise and you will find you own way