This is an advertisement
Interested In Advertising? | Contact Us Here

Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

Pages: [1]

LWC

  • Posts: 6824
If your Ro pumps out 000
« on: November 27, 2008, 05:08:06 pm »
Do you still need to use resin after anyway?
Logged

elite mike

Re: If your Ro pumps out 000
« Reply #1 on: November 27, 2008, 05:13:12 pm »
no
Logged

s.w.c

  • Posts: 1174
Re: If your Ro pumps out 000
« Reply #2 on: November 27, 2008, 05:13:21 pm »
ive often thought this but i cant see the ro-unit staying at 0.00ppm for long it might for a month or two but it will start to creep up, mine use too now three mths later it comes out at 2-3 ppm. so resin will always be needed at some point,
Logged

LWC

  • Posts: 6824
Re: If your Ro pumps out 000
« Reply #3 on: November 27, 2008, 05:15:49 pm »
Quote from: s.w.c on November 27, 2008, 05:13:21 pm
ive often thought this but i cant see the ro-unit staying at 0.00ppm for long it might for a month or two but it will start to creep up, mine use too now three mths later it comes out at 2-3 ppm. so resin will always be needed at some point,

hmm, not so, 2 years on mine it is still pumping out 000, in is 050
Logged

AuRavelling79

  • Posts: 26686
Re: If your Ro pumps out 000
« Reply #4 on: November 27, 2008, 05:16:27 pm »
If my RO settled at less than 005 for a long time I don't think I would use resin TBH.
Logged
It's a game of three halves!

s.w.c

  • Posts: 1174
Re: If your Ro pumps out 000
« Reply #5 on: November 27, 2008, 05:17:58 pm »
mine going in is 327ppm and come in out at 2-3ppm i back flush it every time i use it for a hour plus at a time i find the longer i leave it on back flush the better
Logged

dd

  • Posts: 2624
Re: If your Ro pumps out 000
« Reply #6 on: November 27, 2008, 05:18:16 pm »
I stopped using resin as my RO water is around 002-005. As long as it stays in single figures you probably won't need resin.
Logged

gary999

  • Posts: 8156
Re: If your Ro pumps out 000
« Reply #7 on: November 27, 2008, 05:39:38 pm »
my comes out at 000ppm it only goes in at 54ppm havent changed
filters or anything for 18 months
Logged

geefree

  • Posts: 6180
Re: If your Ro pumps out 000
« Reply #8 on: November 27, 2008, 06:07:25 pm »
same here... never used resin.  ;)
Logged

dmlservices

  • Posts: 981
Re: If your Ro pumps out 000
« Reply #9 on: November 27, 2008, 06:26:07 pm »
lwc , told you a while ago you do not need resin if it comes out at 000. ;)

daz

Logged

birdymiller

  • Posts: 682
Re: If your Ro pumps out 000
« Reply #10 on: November 27, 2008, 08:42:08 pm »
Mine started to rise a few months ago from 000. Its currently 004. I flush it every other day for half an hour. It seems to have peaked at 004 and is not getting any higher ???
Logged

Mick (UHPS)

  • Posts: 161
Re: If your Ro pumps out 000
« Reply #11 on: November 28, 2008, 02:35:38 pm »
My TDS going in is 95ish and comes out of the RO at 000 and its 4 years old now. I have modified my system so the I can run both Flojet pumps through a single pipe and every day I connect this to the water input and run until the drain is less then 005 TDS. Its a Facelift system and Dan recommended this when I had it installed.
Logged
Pages: [1]