Thats around 375 quid, and how much postage to UK, and what do i need to do to get it running in my van? Luke
O.K. you asked Luke so here we go.
1 x 40 ich RO housing
1 x 40 inch low pressure membane
1 x 10 or 20 inch housing with sediment pre-filter
1 x 10 or 20 inch housing with carbon filter.
The sequence is: sediment filter... carbon filter.. RO inlet
Your RO will have 2 outlets.. one watse and one product. The waste needs to be piped outside to a drain of some sort. The product in your cae would go direct into ur tank.
OK thats the basic bit now if u want an auto cut off u will need a solenoid inline BEFORE ur RO coulped to a circuit breaking float valve in ur tank. Preferably one that fits into the top of ur tank. U will need to provide power to the solenoid.. normally 12v dc so ur system battery can do this. U will need an on/off switch to power the solenoid. To fill u switch the power on to the solenloid which then opens to let the water into ur RO system then when ur tank is full the curcuit breaking float valve will turn the power off to the solenoid so that it closes and wont let water in..... still fancy an RO system Luke? lol
