This is an advertisement
Interested In Advertising? | Contact Us Here

Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

Pages: [1]

Majestic

Alex / Jeff shurflow / varistream update
« on: August 02, 2007, 11:34:00 am »
I have just had a new pump and varistream fitted  in my van.
I came to use it and water is leaking from the bottom of the pump ( the black plastic bit )
I have tightened up the screws but its still leaking water. Both are new, has anyone had this problem .


Just had another look and its leaking from the black bit with 3 screws underneath the inlet / outlet fitting
Logged

Jason Atwell

  • Posts: 374
Re: shurflow / varistream
« Reply #1 on: August 02, 2007, 02:50:55 pm »
 :'(
Logged
Fleetwood Window Cleaning Services

Majestic

Re: shurflow / varistream
« Reply #2 on: August 02, 2007, 04:22:35 pm »
Thanks Jase, your  home early today


 water still leaking out of my pump . Good job my van has protectacote.

Im sure Alex will know
We should have a ask Alex section
Logged

jeff1

  • Posts: 5855
Re: shurflow / varistream
« Reply #3 on: August 02, 2007, 05:00:11 pm »
John sounds like the seal isn't seated properly between the pump case and the pump head.

Sounds like you will have to send it back.
Logged

Majestic

Re: shurflow / varistream
« Reply #4 on: August 02, 2007, 05:07:28 pm »
Great :(
Logged

Alex Gardiner

  • Posts: 7744
Re: shurflow / varistream
« Reply #5 on: August 02, 2007, 05:28:06 pm »
Sounds like either a split diaphragm or as Jeff1 said an incorrectly assembled pump. My guess would be a split diaphragm. Either way it will need to go back.
Logged

Majestic

Re: shurflow / varistream
« Reply #6 on: August 02, 2007, 05:41:02 pm »
After having another look at it , the water seems to be coming from the black bit of plastic with 3 screws underneath the inlet / outlet  fittings
Logged

NWH

  • Posts: 16952
Re: Alex / Jeff shurflow / varistream update
« Reply #7 on: August 02, 2007, 06:19:15 pm »
You need to take off the pressure switch and re-seat the spring,there is a little round peice of black plastic that goes on top of the spring,when fitted properly this round black button like peice of plastic should move up and down smoothly.
Logged

Majestic

Re: Alex / Jeff shurflow / varistream update
« Reply #8 on: August 02, 2007, 10:05:44 pm »
Where will I find this
Logged

NWH

  • Posts: 16952
Re: Alex / Jeff shurflow / varistream update
« Reply #9 on: August 02, 2007, 10:10:44 pm »
You need to undo the 3 screws on the pressure switch 3x cross head screws,pull the bottom off and then put back together making sure it`s assembled with everything in place.If somethings loose it will leek.
Logged

NWH

  • Posts: 16952
Re: Alex / Jeff shurflow / varistream update
« Reply #10 on: August 02, 2007, 10:12:45 pm »
Make sure you disconnect the pressure switch with the varistream,it`s not required that`s why i love it.
Logged

Peter Fogwill

  • Posts: 1415
Re: Alex / Jeff shurflow / varistream update
« Reply #11 on: August 03, 2007, 12:35:04 am »
Quote from: John Garnett on August 02, 2007, 11:34:00 am
I have just had a new pump and varistream fitted  in my van.
I came to use it and water is leaking from the bottom of the pump ( the black plastic bit )
I have tightened up the screws but its still leaking water. Both are new, has anyone had this problem .


Just had another look and its leaking from the black bit with 3 screws underneath the inlet / outlet fitting

John, you shouldn't have to worry about it, let the supplier worry about it while the new pump is on it's way to you.

Peter
Logged
Pages: [1]