2014 Vauxhall Combo 2000 1.3 CDTI fitted with Brand New ProClean Electric Oven Cleaning DIP Tank - 12 months MOT
https://www.ebay.co.uk/itm/134794439897?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=sJ3hoMu9RYy&sssrc=4429486&ssuid=sJ3hoMu9RYy&var=&widget_ver=artemis&media=COPYHope it’s ok to post this here. I am selling this current setup due to not starting oven cleaning. The tank is brand new, and it’s a complete waste a tank of this spec not being used. The van has just had a fresh MOT last week with only 2 small advisories (both tyres). This would be a perfect second van, or ideal for someone about to start out.
The tank itself is big and the jewel in the crown of the van - all specs are listed below. In my opinion this is the best electric tank currently available on the market, and is great value for a high-end electric tank of this size. To put it into context - Dirtbusters are currently selling the most comparable tank (still smaller than this one) and without installation for £4520, whilst Oven King are selling a 1 x 3kw smaller tank, again without installation, for £2772.
Feel free to message me if you have questions or want more photos. Collection from Cheltenham.
Van
- 131k miles
- MOT expiry 31st October 2024
- Service history - could do with a fresh service
- Upgraded DAB radio
- 2 sets of keys
- Brand new starter motor fitted 15th September (receipts provided)
Things to note
- Both window buttons are a bit sticky but they still work with no issues
- Sealant around a part of the tank is slightly sticking when opening the lid, probably due to the lid only being opened a handful of times. Nothing some decent adhesive won’t sort
- Occasionally on a sharp turn there is a small clang noise from front drivers side. Mechanic has looked over van, checked all the suspension and said he sees no obvious fault.
DIP Tank Specification.
. Precision cut, folded and welded
. Dimensions W-95cm, D-74cm, H-56cm
· 2mm double skinned stainless steel 304.
· 20mm thick insulation, sides & Base, 10mm lid.
· The inner tank slides out of the outer tank for easy maintenance if required.
· Tank fill line indicator.
· Removable perforated stainless-steel sheet, element chamber divider.
· Hinged lid with 2 stainless steel gas struts.
· Anti-Condensation drip lid.
· 2 lockable lid catches.
· Lid handle.
· Neoprene lid seal.
· 3 bar steam release valve.
· Waste gate valve.
· Removable waste pipe with flex end.
· Empty tank weight 60 KG.
· Holds 70 Litres of Solution.
· Tank supplied with 2, 3kW industrial immersion elements (Data shown below).
· Elements wired with 1 metre length of cable with a 16amp commando connector.
· 1m adaptor cable, 16amp commando connector one end and a 13amp plug on the other.
· If you are using with an extension lead, you must fully unwind the extension lead before use.
Element Technical Data
Features
· Single or Three Phase Application
· 2¼” BSP Heavy Duty Brass Head
· IP55 Robust Rotatable Enclosure
· Incoloy800 Sheath
· Incoloy800 Thermostat Pocket
· 40 to 120 degree Thermostat Included
Data
· Loading (kW): 3
· Voltage (V): 415/240
· Phase Connection: 1PH, 3PH
· Length (mm/inch): 280/11
· Element Diameter (mm): 8
· Watts Density (W/cm2): 8.5
· Sheath Material: incoloy800