[JSMC]

Is there any other connectors out there apart from the brass elbow ones. Last 2 i have had failed within few months. Water  dripping out i noticed.

[Dave Anderson]

Have you thought about Rectus 26 series for your reel-feed?, admittedly I have not used this series 'live' yet but my new leccy-reel has Rectus 26 fittings..... Possibly worth a try.

[Spruce]

Is there any other connectors out there apart from the brass elbow ones. Last 2 i have had failed within few months. Water  dripping out i noticed.

Lee GLS ordered a Sealey fitting.

http://www.cleanitup.co.uk/smf/index.php?topic=200317.20



Here's the missing photo.

It has a male fitting where our hose reels are a male thread. Not sure what female to female threaded sockets are available in that thread though.

[dazmond]

i have a similar fitting on my cox reel spruce.really solid fitting.i use rectus 26 fittings too.never any leaks.

[Leroy Wright]

http://gardinerpolesystems.co.uk/all-products/pump-hose/hose-reels/hose-reel-connectors/hozelock-type-brass-hose-reel-fitting-swivel-elbow-1882.html

[paul alan]

http://gardinerpolesystems.co.uk/all-products/pump-hose/hose-reels/hose-reel-connectors/hozelock-type-brass-hose-reel-fitting-swivel-elbow-1882.html

Ive been using them....leaky!

[JSMC]

Used the brass ones for years. Past 2 i have had are rubbish

[PHILIP HARDY]

The Brass ones always leak after six months or so I just put em down as consumables,

[best]

The brass elbow ones have an Allen key fitting on the inside. Unscrew and replace the washer. Job done.

[DaveG]

http://gardinerpolesystems.co.uk/all-products/pump-hose/hose-reels/hose-reel-connectors/hozelock-type-brass-hose-reel-fitting-swivel-elbow-1882.html

I use these connected to these http://gardinerpolesystems.co.uk/all-products/pump-hose/hose-reels/hose-reel-connectors/pro-026-endstop-to-1-2-screw.html

And then onto 15mm John Guest fittings

[P @ F]

The brass elbow ones have an Allen key fitting on the inside. Unscrew and replace the washer. Job done.

I have done this before , built one from two i had laying about , but where do you get your washers from ?

[Slash]

Mark Munro put something on youtube regarding push fittings to hosereel,check out his YouTube videos, has some really good tips.