[slap bash]

Oh m8 I have had massive problems this week due to the same thing,I bought a new pump and obviously it didn't make any difference couldn't get any water etc,disconnected pipe from base of tank used a cable tie to un plug the hole and happy days away I went it was caked in crap from it. The pump was also full of gunk from it too.

Its like a corbon copy of what happened to me. And it premix my Vision in a liter bottle of water so it mixes properly.

[NWH]

I won't be using it again my tank is still smelling of citrus a week or so later due to it having clung to the sides of the tank inside,I have filled right up to try and shift it every day and today's the first day the smell has died down a bit.

[Jonny 87]

I won't be using it again my tank is still smelling of citrus a week or so later due to it having clung to the sides of the tank inside,I have filled right up to try and shift it every day and today's the first day the smell has died down a bit.

Did you mix any versions of vision? Like the original and eco, or v2. Or have you always used the same type?

[chris turner]

Did you guys use vision daily?
If I remember correctly the advice was to not use vision for 1 day a week to let your tank clear out the build up.
I used vision from the day it came out up until about October last year, never had a problem with a build up of gunk. I only used it 4 days a week, even then on the 5th day I would still get the bubbles as the tank cleared any remaining vision.

[NWH]

Using it that dose is pointless imo I was using about 10ml every other day or so,I've used all versions of it and found the original the best the one that bubbled the most although it didn't give me problems as I quickly went on to the 2nd and 3rd version of it. I'd like to know what's in it l still say some sort of lube at a guess.

[Dave Willis]

Did you guys use vision daily?
If I remember correctly the advice was to not use vision for 1 day a week to let your tank clear out the build up.
I used vision from the day it came out up until about October last year, never had a problem with a build up of gunk. I only used it 4 days a week, even then on the 5th day I would still get the bubbles as the tank cleared any remaining vision.

Odd, that doesn't make sense really unless the stuff floats 'cos the bottom of your tank always gets used first.

[NWH]

It gets into everything Dave the tank-pump-resin can the lot,I changed my resin and it stank of it,it leaves a film on everything it touches.

[Tosh]

it leaves a film on everything it touches.

So does rinse-aid.

[chris turner]

Did you guys use vision daily?
If I remember correctly the advice was to not use vision for 1 day a week to let your tank clear out the build up.
I used vision from the day it came out up until about October last year, never had a problem with a build up of gunk. I only used it 4 days a week, even then on the 5th day I would still get the bubbles as the tank cleared any remaining vision.

Odd, that doesn't make sense really unless the stuff floats 'cos the bottom of your tank always gets used first.

Hey I'm no chemist. Those were the instructions that came with the last bottle I bought.
I remember kev, one of the inventors, saying the same thing to others on another forum.

[NWH]

Lube

[Jonny 87]

Using it that dose is pointless imo I was using about 10ml every other day or so,I've used all versions of it and found the original the best the one that bubbled the most although it didn't give me problems as I quickly went on to the 2nd and 3rd version of it. I'd like to know what's in it l still say some sort of lube at a guess.

I think this is where your problem has been then. David gave out instructions to not mix any of the versions as they can react together and turn to a jelly. My guess is that you've had some of the Eco version in your tank and then you've put in v2 and this is reacted created the gunk. Dave and many others have been using vision for years and not had that problem so somethings gone wrong somewhere with your mix.

[NWH]

I have NEVER EVER mixed them

[the king]

any one tryed added sparkel

[Jonny 87]

I have NEVER EVER mixed them

You say that but have you flushed your tank out with pure water before you started using another? Could have been some left in your tank somewhere if you didn't flush it.

If you have then who knows. I don't use vision but use a similar tweaked version and have done for about 4 years with absolutely no problem. Bit weird.

[NWH]

The tank was properly flushed between versions of it,put it between 2 fingers and rub it's like I say similar to a lubricant that's smells nice,very much like KYJelly.

[NWH]

I have set my system up to run at PPB now,imo far superior to any additive you can put in the tank.

[the king]

how do you get ppb any links NWH  what cost is it to set up?

[NWH]

RO and pre filters then standard resin followed by Nuclear resin,you have to monitor the standard resin so that as soon as it climbs off 000 you change that resin can,I change the nuclear as well every other time that way you can be pretty sure you'll get PPB at the brush. Nuclear resin is £300 a bag but imo you can see the difference.

[֍Winp®oClean֍]

Ya gotta laugh at this place sometimes!!

[Tosh]

RO and pre filters then standard resin followed by Nuclear resin,you have to monitor the standard resin so that as soon as it climbs off 000 you change that resin can,I change the nuclear as well every other time that way you can be pretty sure you'll get PPB at the brush. Nuclear resin is £300 a bag but imo you can see the difference.

Can we see a picture of that tattoo on your forehead?