[Phil J]

Hey Dave,
Please could you tell me where you bought your 2KW immersion from and what length is it?
Thanks, Phil.

[Dave Willis]

Heatrod Elements and it's a fourteen incher.
Takes about two weeks for them to make one and deliver about £57 I think. I bought two so I always have a spare. Bit pricey I suppose but cheaper than a gas boiler.
I haven't got my tank above 30 degrees yet so if you want more heat than that you might want 3kw or more but then you'll need to change your wiring on the supply.

[Sandy Cheeks]

It's my prediction that Dave will swap out for a full blown 3kW element with 16amp rig so my advice to onlookers is- prepare for the real deal to begin with. 

[Dave Willis]

 

Don't know. I shattered two panes with my fogwash not much more than 30 so might not bother.

[Phil J]

Thanks for that Dave, I'll give them a bell.

[Sandy Cheeks]

 

[DeLuce]

Heatrod Elements and it's a fourteen incher.
Takes about two weeks for them to make one and deliver about £57 I think. I bought two so I always have a spare. Bit pricey I suppose but cheaper than a gas boiler.
I haven't got my tank above 30 degrees yet so if you want more heat than that you might want 3kw or more but then you'll need to change your wiring on the supply.

Have you put the temp up on the little screw on the element temp sensor? I've got the 2kw element (swapped from a3kw) and tend to put it on from 4-6hrs and getting 35-38 degrees at the bottom of the tank as I've got a temp gauge fitted there.

[DaveG]

Ordered mine today

[8weekly]

It's my prediction that Dave will swap out for a full blown 3kW element with 16amp rig so my advice to onlookers is- prepare for the real deal to begin with. 

Looks like Chumbucket's back.

[Dave Willis]

Yes, turned the dial up. It's a lot of water mind for 2kw - 650L I measure the top of the tank as heat rises I would have thought it most likely to be the hottest place. I have the element right down the bottom of the tank as low as I could get it. I'm happy with 30 degrees as I don't trust really hot water in winter.

[Dave Willis]

Ordered mine today

Don't forget the mechanical flange. An ordinary back nut won't reach the threads.

[DaveG]

Ordered mine today

Don't forget the mechanical flange. An ordinary back nut won't reach the threads.

Got that already, handy having a plumber for a brother

[Dave Willis]

Mummys' little solders.

[DeLuce]

Yes, turned the dial up. It's a lot of water mind for 2kw - 650L I measure the top of the tank as heat rises I would have thought it most likely to be the hottest place. I have the element right down the bottom of the tank as low as I could get it. I'm happy with 30 degrees as I don't trust really hot water in winter.

Oh, senior moment!! I'd forgotten you've a 650ltr