This is an advertisementInterested In Advertising? | Contact Us Here
Quote from: Darren LanesWindowCleaning.com on July 29, 2013, 06:17:17 pmI flooded my garage once too many times. Other than the door my garage floor is now completely waterproof to 5 inches up the wall.Why don't you fit an overflow pipe to the side of the tank. This is what we have. Its connected to a length of hose that ends up at the drain for the garage roof. I don't think ours has ever been used as we have a float switch and solenoid valve which switches the water off to the r/o when the IBC tank is full. If you are on timer or manual setup, then things could go wrong occassionally.As Alex has said in reply to the first poster, processing water into a seperate IBC tank is the way to go. When I processed water into my trailer over night, I woke up to either find it over flowing or with no water at all as I had forgotten to switch the r/o on before I went to bed, or someone else had switched the outside tap off, etc.
I flooded my garage once too many times. Other than the door my garage floor is now completely waterproof to 5 inches up the wall.
We are moving soon and I will have lots of off road parking. That being the case, I would like to move away from a static tank, but equally I don't wnt to spend a fortune on a van mounted system. What would a fitted one cost and are their alternatives?
Quote from: 8weekly on July 28, 2013, 05:27:08 pmWe are moving soon and I will have lots of off road parking. That being the case, I would like to move away from a static tank, but equally I don't wnt to spend a fortune on a van mounted system. What would a fitted one cost and are their alternatives?Use your static production system to fill up your existing tank in your van. No fortune spent and no extra cost at all. Some times the most obvious things can pass people by . Fitted systems usually start about 1.5k.